John Deere Scraper Systems 2112C

2112C
The 2112C Carry-All Scraper is the largest of the carry-all scraper family. Designed specifically for construction applications, this beast holds 21 cu yd and features a 12-ft cut width. The 2112C Carry-All Scraper is a four-tire scraper that works well for construction contractors who use 425-hp to 575-hp tractors.

CAPACITY
Struck capacity cubic yards	14 cu yd
Heaped capacity cubic yards	21.5 cu yd

DIMENSIONS
Overall dimensions	--
Length, ft, in. (mm)	29 ft 10 in. 9093 mm
Width, ft, in. (mm)	13 ft 9 in. 4191 mm
Height, ft, in. (mm)	8 ft 0 in. 2438 mm
Bucket dimensions	--
Length, ft, in. (mm)	8 ft 10 in. 2692 mm
Width, ft, in. (mm)	12 ft 0 in. 3658 mm
Height, ft, in. (mm)	3 ft 10 in. 1168 mm

WEIGHT
Approximate shipping weight, lb (kg)	25,300 lb 11,475 kg

SCRAPER WEIGHT DISTRIBUTION
Tongue	28%
Wheels	74%

TIRES
Number of tires per scraper	4
Tire sizes	--
Standard	23.5 X 25
Option 1	26.5 X 25
Option 2	NA

HORSEPOWER RECOMMENDATIONS
Minimum	450 hp
Maximum	575+ hp

BLADES AND ROUTER
2 rows of blade bolts	Standard
6-in. bolt-hole spacing	Standard
Straight blade configuration	Standard, 3 piece blades
Drop center configuration	Optional
Teeth configuration	Optional
Adjustable router bits	Standard

HYDRAULICS
Size of lines and hoses	3/4 in.
Tandem lines	Standard
Minimum flow required, gpm	25 gpm
Minimum pressure required, psi	2500 psi

PRECISION LEVELING
GPS/Laser adaptable	Yes

LOADING TYPE
Direct loading	Yes
Top loading	Yes
Push loading	Not Approved
Autoload	Yes

HITCHES AND DRAWBARS
Hitch type	Yoke
Special tractor drawbar required	Yes

WARRANTY
Six months	Standard
Extended warranty (2-3 years)	Optional

ADDITIONAL EQUIPMENT
Yoke-type drawbars	Optional
Quick-attach drawbars	Optional
Drawbar hitch adapters	Optional
Scraper-to-scraper quick-attach	Factory Installed Only
Bolt-on rear bumper	Optional
Laser receiver bracket	Optional
High-speed leveling skid pads	NA