John Deere Skid Steers 315

Lightweight agility, heavyweight ability.

Whether you're tiptoeing around zero lot lines, tending livestock, laboring indoors, or removing snow, this nimble skid steer won't have any trouble fitting in. Its small stature enables the 315 to slip comfortably through narrow openings and into tight quarters. Makes it easy to trailer and easy on turf, too. But this "lightweight" won't get pushed around. Optimal 60/40-weight distribution gives it the stability needed for handling heavy loads.
And its high-torque turbocharged 2.4L diesel won't throw in the towel when the going gets tough, either. With the 315, it's not the size of the John Deere skid steer in the fight, but the size of the fight in the skid steer.

Engine
Emission Rating	Interim Tier 4
Engine Make / Engine Model	John Deere / Power Tech 4024T
Net Power, kW (hp) @ Rated rpm	33.5 (45) @ 2400
Gross power, kW (hp)	36.5 (49)
Net peak torque, N-m (lb-ft)	188 (139)
Displacement, L (cu in)	2.4 (149)
Engine aspiration	Turbo
Fuel capacity, L (gal)	66 (17.5)

HYDRAULIC sYSTEM
Standard pump flow, L/min (gpm)	61 (16)
Optional high flow, L/min (gpm)	95 (25)
System pressure, kPa (psi)	23787 (3450)
Hydraulic power, kW (hp)	23.94 (32.1)
Optional high flow hydraulic power, kW (hp)	37.29 (50)

PERFORMANCE
SAE rated operating capacity, kg (lb)	681 (1500)
SAE ROC with optional counterweight, kg (lb)	749 (1650)
Tipping Load, standard, kg (lb)	1362 (3000)
Breakout Force Boom, kN (lb)	17.3 (3900)
Breakout Force Bucket, kN (lb)	14.6 (3300)
Vertical lift geometry	Radial

dRIVE tRAIN
Maximum Ground Speed, standard, kph (mph)	10.9 (6.8)
Two Speed Transmission Ground Speed, kph (mph)	not published
Drive Chain Rating	80
Axle Torque, Nm (lb-ft)	5508 (4050)
Tire size - Standard	10 x 16.5

DIMENSIONS
Length with Bucket, mm (in)	3270 (129)
Length without Bucket, mm (in)	2570 (101)
Width without Bucket, mm (in)	1500 (59)
Height to ROPS, mm (in)	1960 (77)
Height to Hinge Pin, mm (in)	2910 (115)
Dump Height, mm (in)	2260 (89)
Dump Reach, mm (in)	540 (21)
Dump Angle, degrees	40°
Bucket Rollback @ ground, degrees	30°
Wheelbase, mm (in)	1040 (41)
Ground Clearance, mm (in)	193 (7.6)
Angle of Departure, degrees	23.5