get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Bagdad, Arizona

Our vendors have been servicing the Bagdad area for many years now and have a solid reputation of providing the latest, high performance heavy construction equipment on rent. If you are about to get started with a construction project in the region, let us help you with provisioning of construction equipment in a time bound manner.

Since we've a huge network of vendors with a proven track record of providing the best equipment on hire to small as well as large construction industry players, rest assured that the inventory of equipment is more than enough to meet your varied requirements!

You can communicate your requirements right away by dialing our toll free number or get in touch through the contact form on the right.

We will patiently hear you out, learn about your construction project at hand or ongoing requirements and provide you with the best options to choose from.

Equipment Rental Bagdad, Construction equipment rental Bagdad, Construction rental Bagdad, Heavy Equipment Rental Bagdad.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Dozers D39EXi-23
D39EXi-23 Crawler Dozer
iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
 Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 107 HP 79 kW
ISO 9249 / SAE J1349 - Net 105 HP 78 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 8.5 km/h / 5.3 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h		 0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h		 0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h		 0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h		 0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius* 87" 2.2 m
*As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Rigid type
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 6
Type of shoes (standard) Single grouser
Number of shoes (each side) 39
Grouser height 2.1" 53 mm
Shoe width (standard) 20" 510 mm
Ground contact area 3,731 in 24072 cm²
Ground pressure
(with dozer, ROPS cab)		 5.64 psi 0.40 kgf/cm² / 38.9 kPa
Track gauge 5'4" 1620 mm
Length of track on ground 7'9" 2360 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 15.8 U.S. gal 60 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
ROPS cab 18,387 lb 8340 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
ROPS cab 20,922 lb 9490 kg
hydraulic system 
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 80 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt   Right, hold, and left
Blade angle   Right, hold, and left
Additional control valve required for ripper
Positions:  
Ripper lift   Raise, hold, and lower

JCB Backhoe Loaders 3CX 17 SUPER

3CX 17 SUPER

The JCB 3CX 17 Super is the world's number one backhoe loader (along with the JCB 4CX). The 3CX 17 Super is a product of JCB's efficient design philosophy, responding to today's rising fuel prices and environmental concerns with class-leading efficiency and low running costs. In short, we've applied innovative technologies to squeeze the absolute maximum out of every drop of fuel on the JCB 3CX 17 Super.

The result? In typical roading, loading, excavating and idle cycles, the 3CX 17 Super JCB backhoe loader, equipped with a powerful 109hp (81kW) EcoMAX engine, delivers an average fuel saving of up to 16%, plus lower emissions and noise levels. And, with extended periods between fill ups, you benefit from a longer, more productive working day.

But the efficiency (and other) benefits certainly don't end there on a JCB 3CX 17 Super.

Machine Specification
Engine Model EcoMAX T4i
Gross Engine Power 109hp (81kW)
Operating Weight 17515lb (7947kg)
Peak Torque 516Nm (381lbf)
Pump Flow
Steer Mode 2WS
Backhoe Specification
Bucket Rotation (Speed) 201°
Dig Depth (ret/ext) 17' 7" (5360mm) / 21' 6" (6550mm)
Maximum Bucket Tearout 7433kgf (16387lbf)
Maximum Dipper Tearout (ret/ext) 4849kgf (10690lbf) / 3461kgf (7632lbf)
Maximum Loader Height (ret/ext) 14' 4" (4390mm) / 16' 4" (4990mm)
Loader Specification
Load Over Height (6-in-1) 10' 6" (3200mm)
Loader Breakout 4732kgf (10432lbf)
Maximum Shovel Breakout 6531kgf (14398lbf)
Shovel Capacity 1.58yd3 (1.2m3)

John Deere Crawler Dozers 750K
Simply advanced.

When our customers sound off, we listen. So when you asked us to turn down the noise and turn up productivity on our 750K Crawler Dozer, we responded with a spacious, redesigned cab that's noticeably quieter. And a more powerful EPA Final Tier (4)/EU Stage IV diesel engine.

Equipment owners and operators will also find lots more to like in the K-Series - such as a hydraulic-driven fan with optional reversing mode provides efficient cooling, reduces noise, and conserves precious fuel. Innovative V-Cool design provides convenient access to both sides of the coolers for easy cleanout. And a convenient sealed-switch module for fingertip control of numerous one-of-a-kind features and functions.

The K-Series are loaded with even more performance enhancements, like Total Machine Control (TMC). Standard on all of our K-Series Crawler Dozers, this performance-enhancing feature provides customized decelerator mode and response, forward/reverse ground-speed ranges, steering modulation, and more. It enables your operators to do their best, by being themselves.

Engine
Emission Rating Tier 4
Engine Make / Engine Model John Deere / PowerTech PVX 6068
Net Power, kW (hp) @ Rated rpm 123 (165) @ 1800
Displacement, L (cu in) 6.8 (415)
Transmission
Type Hydrostatic
Speed Range - forward 1
Speed Range - reverse 1
Maximum Speeds Forward, kph (mph) 9.7 (6)
Maximum Speeds Reverse, kph (mph) 9.7 (6)
Final Drives
Type Double Reduction - Planetary
Steering
Type No
Hydraulic System
Pump Type Variable Displacement Piston
Pump Flow, L/min (gpm) 138 (36)
System relief pressure, kPa (psi) 24993 (3625)
Undercarriage
Track Gauge, mm (ft in) 1880 (6 ft 2 in)
Length of Track on Ground, mm (ft in) 2591 (8 ft 6 in)
Standard shoe type --
Ground Contact Area, cm sq (sq in) 28957 (4488)
Ground Pressure, kPa (psi) 52.9 (7.67)
No. of Track Rollers 7
Track Pitch, mm (in) 191 (7.5)
Track Shoes, each side 40
Track Oscillation Yes
Dozer
Blade Width, mm (ft in) 3251 (10 ft 8 in)
Blade Height, mm (ft in) 1240 (4 ft 1 in)
SAE Blade Capacity, cu m (cu yd) 4.3 (5.6)
Blade Lift Height, mm (ft in) 1050 (3 ft 5 in)
Digging Depth, mm (in) 575 (22.6)
Overall Width with Blade Angled, mm (ft in) not published
Blade Tilt, mm (ft in) 711 (2 ft 4 in)
Dimensions
Height w/ROPS, mm (ft in) 3128 (10 ft 3 in)
Length w/Dozer, mm (ft in) not published
Ground Clearance, mm (in) 356 (14)
Capacities
Fuel Tank, L (gal) 368 (97.5)
Hydraulic Reservoir, L (gal) 112 (29.7)
Weight
SAE Operating Weight, kg (lb) 15679 (34566)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics