Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Equipment Rental in Adelanto, California

When you need machinery and need it real quick to keep your construction project on track,you cannot of course buy heavy construction equipment outright. In such cases,it makes perfect sense to go with a construction equipment rental in Adelanto, California

Yes, you can have heavy construction equipment at your disposal,right from dozers and excavators to forklifts and everything else on a job-to-job basis.

There is no capital investment involved and it is possible to get started in as little as a day or two no matter where you are in California. We have a network of construction equipment vendors in Adelanto, California and that supply of the smallest and largest of construction equipment.

Getting started is easy. You can dial our toll free number right away and learn more about how this rental service works. You can also fill out the contact form and we will get back to you in no time.

Equipment Rental Adelanto, Construction equipment rental Adelanto, Construction rental Adelanto, Heavy Equipment Adelanto.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Dozers D37EX-23

D37EX-23 Crawler Dozer

Komatsu small dozers are great finish grading tractors for a lot of reasons but the most obvious is the super slant nose design. The super slant nose design moves the coolers and hydraulic fan to the rear and the operator forward to create a balance that makes fine grading with or without a grade control system a breeze. A fully hydrostatic drivetrain gives the operator incredibly quick and precise maneuverability. And new Power and Economy working modes allow the operator to adjust his machine's performance to his current job and save on fuel consumption as he's doing it. Like all Komatsu products, the D37EX-23 has the advanced hydraulics to make the addition of a grade control system seamless and turn it from a great grading tractor to an incredibly precise and fast fine grading system.

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 91 HP 68 kW
(ISO 14396 89 HP 66 kW
ISO 9249 / SAE J1349 - Net 79 HP 59 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius* 79" 2.0 m
*As measured by track marks on the ground at pivot turn.
Undercarriage
Suspension Rigid track frame
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks Unique seals minimize the entry of foreign abrasive material into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with a grease gun.
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Tractor for inside mounted blade (PAT)
Number of track rollers (each side) 6
Number of carrier rollers (each side) 1
Type of shoes (standard) Single grouser
Number of shoes (each side) 41
Grouser height 1.9" 47 mm
Shoe width (standard) 18" 460 mm
Ground contact area 2,778 in² 17920 cm²
Ground pressure
(with standard shoe)
6.39 psi 0.45 kgf/cm² / 44.1 kPa
Track gauge 5'2" 1570 mm
Length of track on ground 7'4" 2230 mm
Link pitch 6.1" 154 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 16.9 U.S. gal 64 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 16,314 lb 7400 kg
Operating weight: Operating weight: Including power angle tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 18,695 lb 8480 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min / 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3.0" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 4"
80 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

John Deere Wheel Loader 524K Interim Tier 4
ThinK. Again.

Although they don't appear all that different from their standard-setting predecessors, the K-Series Loaders are loaded throughout with even more customer-inspired enhancements: spacious, quieter cab with unsurpassed visibility, expanded sealed-switch module, secured key-less start, and easier-to-read LCD monitor with advanced onboard diagnostics.

You have more choices, too, including the 2¾-yard 524K, NeverGreaseTM pins, and automatic diff-lock axles, to list just a few. Exceptional productivity, long-term durability, unparalleled versatility - you get it all in the John Deere K-Series.

ENGINE
Engine Make / Engine Model John Deere / PowerTech PVX 6068
Emission Rating Interim Tier 4
Net Power, kW (hp) @ Rated rpm 105 (141) @ 1700
Displacement, L (cu in) 6.8 (415)
Net Peak Torque, N-m (lb-ft) 623 (459)
Calculated % Torque Rise 53
ELECTRICAL
Voltage 24
Alternator amps 100
TRANSMISSION
Type Powershift
Max. Travel Speed - fwd, kph (mph) 36 (22.4)
Max. Travel Speed - rev, kph (mph) 24.1 (15)
DIFFERENTIAL
Traction Device - Front / Rear F: 100 / R: Open
FINAL DRIVE
Front Axle Type Planetary - Inboard
Rear Axle Type Planetary - Inboard
SERVICE BRAKES
Service Brakes Type Wet Disc
Service brake location Axle Inboard
Service brake actuation Hydraulic
HYDRAULIC SYSTEM
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 165 (44)
System Pressure, kPa (psi) 24994 (3625)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) 1.9 (2.5)
Bucket Capacity Max., cu m (cu yd) 2.1 (2.75)
Breakout Force, Std Bucket, kN (lb) 90.1 (20267)
Ride Control Optional
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 2.1 (2.75)
Tire Size Standard 20.5 R25
TIPPING LOAD
Straight, kg (lb) 10255 (22609)
Full Turn, kg (lb) 8914 (19652)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 3770 (12 ft 4 in)
Dump Clear @ 45 deg, mm (ft in) 2770 (9 ft 1 in)
Reach @ 7', mm (ft in) 1440 (4 ft 9 in)
Reach @ Full Height, mm (ft in) 980 (3 ft 3 in)
Wheelbase, mm (ft in) 2930 (9 ft 7 in)
Clearance Circle, mm (ft in) 11770 (38 ft 7 in)
Overall Length, mm (ft in) 7340 (24 ft 1 in)
Height to Top of Cab, mm (ft in) 3250 (10 ft 8 in)
Ground Clearance, mm (in) 400 (15.7)
CAPACITIES
Fuel Tank, L (gal) 242 (64)
Hydraulic Reservoir, L (gal) 122.8 (32.5)
WEIGHT
SAE Operating Weight, kg (lb) 12449 (27445)
Metric Ton Weight, kg (lb) 12.449 (27.445)

Komatsu Wheel Loaders WD600-6
WD600-6 Wheel Dozer

High productivity is the story of the WD600-6 wheeled dozer. The operator has two engine power modes, load sensing hydraulics and a modulated clutch system to harness the 527 horsepower to maximize production when moving mass quantities of soil, coal, chips, slurry or whatever gets in the way.

Engine
Model Komatsu SAA6D170E-5*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 6.69" x 6.69" 170 mm x 170 mm
Piston displacement 1413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAEJ1995 - Gross 530 HP 396 kW
ISO 9249 / SAEJ1349 - Net 527 HP 393 kW
Hydraulic fan at maximum speed - Net 502 HP 374 kW
Rated rpm 1800 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
EPA Tier 3 and EU stage 3A emissions certified.
Transmission
Torque converter:
Type 3-element, single-stage, double-phase
Transmission:
Type Full-powershift, planetary type
Travel speed Measured with 35/65-33 tires
Speed: Forward
(Lock-up clutch ON)
Reverse
1st 4.2 mph
6.7 km/h
4.5 mph
7.3 km/h
2nd 7.3 mph
11.7 km/h(7.7 mph
12.4 km/h)
8.0mph
12.8 km/h
3rd 12.6 mph
20.3 km/h(13.5 mph
21.7 km/h)
13.7 mph
22.0 km/h
4th 20.5 mph
33.0 km/h(23.4 mph
37.7 km/h)
22.4 mph
36.0 km/h
Axles and Final Drives
Drive system Four-wheel drive.
Front Fixed, full-floating.
Rear Center-pin support, full-floating, 26° total oscillation.
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, full-hydraulic power steering
Steering angle 43° each direction.
Minimum turning radius at the center of outside tire 23'3" 7075 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 43.1 U.S. gal/min 163 ltr/min
Relief valve setting 4,980 psi 34.3 MPa
350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 5.1" x 20" 130 mm x 510 mm
Loader control:
Hydraulic pump Piston pump
Capacity at rated rpm 47.6 + 47.6 U.S. gal/min 180 + 180 ltr/min
Relief valve setting 3,560 psi 24.5 MPa 250 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders: Bore x Stroke: Bore x Stroke:
Blade lift - 1 6.3" x 42.5" 160 mm x 1080 mm
Tilt and pitch - 2 7.0" x 9.3" 180 mm x 237 mm
Control valve 3-spool type
Control positions:
Blade lift Raise, hold, lower, and float
Tilt and pitch Tilt-left, tilt-right, hold, pitch forward and back
Hydraulic cycle time
Raise 2.0 sec
Lower 1.3 sec
Tilt (left / right) 0.8 / 1.1 sec
Pitch (front / rear)mage 2.1 / 1.6 sec
Service Refill Capacities
Cooling system 38.8 U.S. gal 147 ltr
Fuel tank 189.7 U.S. gal 718 ltr
Engine 22.7 U.S. gal 86 ltr
Hydraulic system 117.0 U.S. gal 443 ltr
Axle:
Front 41.0 U.S. gal 155 ltr
Rear 41.0 U.S. gal 155 ltr
Torque converter and transmission 21.9 U.S. gal 83 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics