Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Equipment Rental in Big Sur, California

When you need machinery and need it real quick to keep your construction project on track,you cannot of course buy heavy construction equipment outright. In such cases,it makes perfect sense to go with a construction equipment rental in Big Sur, California

Yes, you can have heavy construction equipment at your disposal,right from dozers and excavators to forklifts and everything else on a job-to-job basis.

There is no capital investment involved and it is possible to get started in as little as a day or two no matter where you are in California. We have a network of construction equipment vendors in Big Sur, California and that supply of the smallest and largest of construction equipment.

Getting started is easy. You can dial our toll free number right away and learn more about how this rental service works. You can also fill out the contact form and we will get back to you in no time.

Equipment Rental Big Sur, Construction equipment rental Big Sur, Construction rental Big Sur, Heavy Equipment Big Sur.

Unable to parse entered address. API response code: REQUEST_DENIED

JCB Light Equipment Disc Cutter

Disc Cutter

The JCB disc cutter is a well-balanced, quiet unit designed for use with JCB powerpacks. It can cut most materials including metals, concrete, and stone.

Our disc cutter has a tooth belt drive and totally enclosed working parts, which is ideal in dusty and dirty working conditions. The disc is protected by a steel guard, and adjustable to any of three positions, which makes it perfect for most work sites and applications.

Finally, because it's hydraulic, the JCB disc cutter is low maintenance (no carburettor to block), very quiet and almost vibration-free.

    • Flow regulator to prevent over-speeding
    • djustable guard for safety
    • One stone cutting disc and one metal cutting disc included
    • Removable handle for right or left hand operation
    • Tail hoses with flat faced quick release dripless couplings for speed of change

Komatsu Excavators PC228USLC-10

PC228USLC-10 Hydraulic Excavator

Need to excavate tough material in a confined space or along a roadway? The PC228USLC-10 Hydraulic Excavator may be the answer to your problem. With short swing and implement radius this excavator can work in one lane of traffic without closing the next lane, keeping traffic disturbance to a minimum. Combine that with increased digging and lifting power over the previous model and you have an incredibly powerful digging tool in a tight package.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged and air-to-air aftercooled
Number of cylinders 6
Bore 4.21" 107 mm
Stroke 4.88" 124 mm
Piston displacement 408 in³ 6.69 ltr
Horsepower:
SAE J1995 / Gross 165 HP 123 kW
ISO 9249 / SAE J1349 / Net 158 HP Net 116 kW
Rated rpm 2000
Governor All-speed control, electronic
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow
Air cleaner Air cleaner, double element and auto dust evacuator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydraulics
Type HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valve and pressure compensated valve
Main pump
Type Variable-capacity piston pump.
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 125.5 gal/min 475 ltr/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Travel circuits 5,400 psi 37.3 MPa 380 kgf/cm²
Pilot circuit 470 psi 3.2 MPa 33 kgf/cm²
Implement circuits 5,400 psi 37.3 MPa 380 kgf/cm²
Swing circuits 4,264 psi 29.4 MPa 299 kgf/cm²
Hydraulic cylinders:
(Number of cylinders – bore x stroke x rod diameter)
Boom / 2 4.7" x 54.5" x 3.3" 120 mm x 1385 mm x 85 mm
Arm / 1 5.3" x 58.7" x 3.7" 135 mm x 1490 mm x 95 mm
Bucket / 1 4.5" x 44.1" x 3.2" 115 mm x 1120 mm x 80 mm
Drives and Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Maximum drawbar pull 45,410 lb 202 kN 20600 kgf
Maximum travel speed:
High 3.4 mph 5.5 km/h
Mid 2.5 mph 4.1 km/h
Low 1.9 mph 3.0 km/h
Parking brake Mechanical disc brake
Swing System
Driven by Hydraulic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Mechanical disc brake
Swing speed 11.0 rpm
Swing torque 48,124 ft lbs 6656 kg.m
Undercarriage
Center frame X-frame leg
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
Number of shoes (each side): 49
Number of carrier rollers (each side): 2
Number of track rollers (each side): 9
Coolant and Lubricant Capacity Refilling
Fuel tank 82 U.S. gal 310 ltr
Radiator 7.9 U.S. gal 30 ltr
Engine 6.1 U.S. gal 23.1 ltr
Final drive, each side 1.4 U.S. gal 5.0 ltr
Swing drive 1.7 U.S. gal 6.5 ltr
Hydraulic tank 33.3 u.s. gal 126 ltr
Operating Weight (APROXIMATE)
Operating weight including 5700 mm / 18'8" one-piece boom, 2925 mm / 9'7" arm, SAE heaped 0.80 m³ / 1.05 yd³ backhoe bucket, operator, lubricant, coolant, full fuel tank, and the standard equipment.
Shoes Operating Weight Ground Pressure
600 mm
24"
24130 kg
53,195 lb
0.51 kg/cm²
7.28 psi
700 mm
28"
24395 kg
53,785 lb
0.44 kg/cm²
6.21 psi
800 mm
31.5"
24675 kg
54,405 lb
0.39 kg/cm²
5.62 psi

Komatsu Excavators PC2000-8
PC2000-8 Hydraulic Excavator

Komatsu’s “Operator First” design concept is exemplified in the PC2000-8 Hydraulic Excavator. The cab is designed for mining with 30% more cab volume, a full front window with two wipers, OPG level 2 top cab guard, extensive exterior lighting, a 7" LCD color monitor with Eco-gauge and an air suspension seat. The operator can tailor his machine performance using the Economy, Power or Heavy Lift modes for maximizing efficiency.

Engine
Model Komatsu SAA12V140E-3
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, aftercooled
Number of cylinders 12
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 1860 in³ 30.48 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 - Gross 976 HP 728 kW
ISO 9249 / SAE J1349 - Net 956 HP 713 kW
Hydraulic fan at maximum speed 910 HP 679 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
Hydraulic System
Type Open-center load sensing system
Number of selectable working modes 2
Main pump:
Type Variable displacement piston pumps
Pumps for Boom, arm, bucket, swing and travel circuits
Maximum flow:
For attachment, swing and travel 612.2 U.S. gpm 2317 ltr/min
For fan drive 85.6 U.S. gpm 324 ltr/min
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Fan 2 x axial piston motors
Relief valve setting:
Attachment circuits:
Backhoe 4,270 psi 29.4 MPa 300 kgf/cm2
Loading shovel 4,270 psi 29.4 MPa 300 kgf/cm2
Travel circuit 4,760 psi 32.9 MPa 335 kgf/cm2
Swing circuit 4,270 psi 29.4 MPa 300 kgf/cm2
Pilot circuit 430 psi 2.9 MPa 30 kgf/cm2
Hydraulic cylinders:
Number of cylinders Bore x Stroke Bore x Stroke
Backhoe:
Boom / 2 11.8" x 104.2" 300 mm x 2647 mm
Arm / 2 9.8" x 84.2" 250 mm x 2138 mm
Bucket 7.9" x 85.4" 200 mm x 2170 mm
Loading shovel:
Boom / 2 11.0" x 76.0" 280 mm x 1930 mm
Arm / 2 7.9" x 85.4" 200 mm x 2170 mm
Bucket / 2 8.9" x 80.7" 225 mm x 2050 mm
Bottom dump / 2 7.1" x 23.6" 180 mm x 600 mm
Swing System
Swing gear 2 x Planetary gear
Swing circle lubrication Grease
Swing holding brakes Mechanical disc brakes
Swing speed 4.8 rpm
Drive System
Travel gear Planetary gear
Gradeability 65%
Maximum travel speed 1.7 mph 2.7 km/h
Parking brakes Mechanical disc brakes
Undercarriage
Track adjuster Grease
No. of shoes 49 each side
No. of carrier rollers 3 each side
No. of track rollers 8 each side
Coolant and Lubricant Capacity (Refilling)
Fuel tank 898.3 U.S. gal 3400 ltr
Radiator 47.6 U.S. gal 180 ltr
Engine 31.7 U.S. gal 120 ltr
Travel gear, each side 22.5 U.S. gal 85 ltr
Swing drive 7.9 x 2 U.S. gal 30 x 2 ltr
Hydraulic tank 343.5 U.S. gal 1300 ltr
PTO 7.9 U.S. gal 30 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics