get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Equipment Rental in Kentfield, California

When you need machinery and need it real quick to keep your construction project on track,you cannot of course buy heavy construction equipment outright. In such cases,it makes perfect sense to go with a construction equipment rental in Kentfield, California

Yes, you can have heavy construction equipment at your disposal,right from dozers and excavators to forklifts and everything else on a job-to-job basis.

There is no capital investment involved and it is possible to get started in as little as a day or two no matter where you are in California. We have a network of construction equipment vendors in Kentfield, California and that supply of the smallest and largest of construction equipment.

Getting started is easy. You can dial our toll free number right away and learn more about how this rental service works. You can also fill out the contact form and we will get back to you in no time.

Equipment Rental Kentfield, Construction equipment rental Kentfield, Construction rental Kentfield, Heavy Equipment Kentfield.

Unable to parse entered address. API response code: REQUEST_DENIED

New Holland Compact Track Loaders C238

Compact Track Loaders C238

THE SUPER BOOM® ADVANTAGE
New Holland Compact Track Loader's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model FPT / F5H FL413CL
Bore/stroke, in (mm) 3.9 x 4.3 (99 x 109)
Displacement, in3 (L) 207 (3.4)
Fuel injection HPCR Direct
Air intake Turbocharged Aftercooled with external EGR
Horsepower per SAE J1349 Gross hp
(kW)		 90 (67) @ 2500 rpm
Horsepower per SAE J1349 Net hp
(kW)		 84 (63) @ 2500 rpm
Peak torque, lb-ft (Nm) 282 (383) @ 1400 rpm
PowerTrain
Travel speed, low range, mph
(km/h)		 5.1 (8.2)
Travel speed, high range
(optional), mph (km/h)		 7.6 (12.2)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 131.1 (3330)
Top of ROPS, in (mm) 80.4 (2043)
Bottom of level bucket, fully
raised, in (mm)		 124.2 (3155)
Overall length without attachment
with coupler, in (mm)		 117.6 (2986)
Dump angle, degrees 55
Dump reach (max height), in (mm) 34.4 (875)
Rollback, bucket on ground,
degrees		 33
Rollback, bucket at full height,
degrees		 85
Track on ground, in (mm) 63.1 (1602)
Ground clearance (bottom of belly
pan), in (mm)		 9.5 (243)
Angle of departure, degrees 32
Clearance circle without bucket,
in (mm)		 56.2 (1428)
Clearance circle rear, in (mm) 70.4 (1789)
Overall width, in (mm) 76 (1930)
Ground pressure, PSI (with spec belt) 4,4
Hydraulic System
Pump flow, gpm (Lpm) 24.2 (91.5)
Optional high flow, gpm (Lpm) 37.6 (142.5)
Relief pressure, psi (bar) 3046 (210)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 13800 (1723)
Rated operating load, 35% tip, lbs (kg) 2660 (1209)
Tipping load, lbs (kg) 7600 (3447)
Breakout force, lift cylinder, lbs (kN) 6110 (27.2)
Breakout force, bucket cylinder, lbs (kN) 7360 (32.7)
Operating weight, lbs (kg) 10,100 (4581)

JCB Light Equipment Submersible Pump

Submersible Pump

JCB's submersible pump comes in either 20 l/min or 30 l/min flow rate guises to match different hydraulic flow power packs. Whichever option you choose, it will be self-priming with a high power-to-weight ratio.

Because our submersible pumps are hydraulically driven, they're self lubricating, maintenance free and can run dry without damage. Aluminium bodies make for light weight and a corrosion free life, while a lifting lug allows them to be safely and accurately placed.

JCB's unique combi-seal prevents any water entering the hydraulic fluid or vice versa.

    • Flat faced quick-release dripless couplings for speed of attachment change
    • Lifting eye to aid placement
    • Supplied with 10m 2in lay flat hose
    • Self priming for speed of use
    • Capable of pumping solids in suspension up to 8mm (6/10 in) diameter for extra versatility

JCB Light Equipment Diamond Core Drill

Diamond Core Drill

The heavy-duty JCB diamond core drill is designed to provide an unrivalled combination of power, flexibility and reliability for all manner of diamond core drilling jobs.

Diamond core drilling is the best way to get a clean cut on both sides of the drilled hole, and JCB's hydraulic drive provides extra benefits.
For example, it can withstand prolonged use and a constant operator-applied pressure without burning out motors, clutches or gearboxes.

What's more, our diamond core drill is over three times more powerful than a typical electric drill, meaning vastly reduced job times and a greater range of applications. In spite of all that, the motor noise is negligible.

Choose from a 2400 RPM @ 20 l/min model for 15-35 mm bits, or a 600 RPM @ 20 l/min option for 40-125 mm bits. Either can be either hand-held or rig mounted.

    • Side handle for ease of use
    • Tail hoses with quick release dripless couplings for speed of attachment change
    • Water hose port for dust suppression and cooling
    • Can be used under water for extra versatility
    • Optional drilling rigs
    • Optional core drill bits
    • Optional pressurised water hand pump
    • Optional extension rods

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics