get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Arriba, Colorado

Looking for a reliable construction equipment rental service in Arriba ? We can help!

We have the most reliable network of construction equipment suppliers in Arriba who offer all kinds of machines and tools on rent. Daily, weekly and monthly rentals are available and therefore, you don't spend a penny extra on the service when you don't need it.

Renting heavy machinery and tools through us means that you will have access to the newest and best in class equipment. Our vendors keep upgrading their inventories on a regular basis. In fact, vendors are added to the network only on the basis of the quality of machines and tools they have ready-for-rent.

Dial our toll free number today and speak to an expert! Alternatively, you can submit the short contact form on the right and we will get back to learn your heavy construction equipment requirements in Arriba.

Over the top personalized customer care guaranteed!

Equipment Rental Arriba, Construction equipment rental Arriba, Construction rental Arriba, Heavy Equipment Rental Arriba.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Dozers D37EXi-23

D37EXi-23 Crawler Dozer

iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 91 HP 68 kW
(ISO 14396 89 HP 66 kW
ISO 9249 / SAE J1349 - Net 79 HP 59 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h		 0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h		 0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h		 0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h		 0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Steering System Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius: 87" 2.2 m
As measured by track marks on the ground at pivot turn.
Undercarriage
Suspension Rigid track frame
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Tractor for inside mounted blade (PAT)
Number of track rollers (each side) 6
Number of carrier rollers (each side) 1
Type of shoes (standard) Single grouser
Number of shoes (each side) 41
Grouser height 1.9" 47 mm
Shoe width (standard) 18" 460 mm
Ground contact area 3,180 in² 20516 cm²
Ground pressure
(with standard shoe)		 5.93 psi 0.42 kgf/cm² / 40.9 kPa
Track gauge 5'2" 1570 mm
Length of track on ground 7'4" 2230 mm
Link pitch 6.1" 154 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 16.9 U.S. gal 64 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
ROPS cab 18,387 lb 8340 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
ROPS cab 20,922 lb 9490 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 80 mm
Hydraulic oil capacity (refill):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold and lower

When selecting a Scissor Lift Rental unit in Lewes, there is a multitude of factors that need attention. Just knowing the weight of the objects to be carried by the forklift is not enough. You must also determine the lift height, calculate the required turning radius, and also pay attention to the benefits of renting over purchasing.

But as simple as these things may sound, the process is complicated. Many managers may have to rely upon opinions given by forklift operators. Alternately, you can seek advice from experts at HeavyRentals.Equipment. We have an experienced team on board who can match you against the best Scissor Lift Rental companies in Lewes. They can give you an accurate idea of the capacity of the different brands and their machines.

We make it more convenient for our clients to get access to reliable Scissor Lift Rental in Lewes. We do this in two simple ways - depending upon your requirement, we can ask some pre-screened vendors in your area to get in touch with you, or we can provide you with their contact details, and help you establish direct contact with them. You choose!

We have a network of vendors with presence in more than 5,000 US locations. So, irrespective of how varied your forklift requirements are or where you are located, we may be able to help you out.

When you hire forklift for rental from one of our dealers, you can be rest assured that it follows all safety standards, and has been thoroughly inspected. Our vendors also offer a pick-drop-service for forklifts.

The right forklift can greatly enhance your efficiency and a wrong decision can be a waste of time and money. Don't take that chance and call our experts right away. We will offer you the best-suited advice for your business. With our help, you will be able to choose the best Scissor Lift Rental company in Lewes in no time.

Komatsu Dozer D155AX-8
D155AX-8
The new Tier 4 Final D155AX-8 dozer incorporates well proven Komatsu engine emissions technology that does not interfere with daily operation. Class leading engine horsepower, large capacity Sigmadozer blade and automatic lockup torque converter efficiently move massive amounts of material while using less fuel than prior model. The operator cab is loaded with features to help maintain operator comfort during the work day.

Engine
Model Komatsu SAA6D140E-7*
Type 4-cycle, water-cooled, direct injection
Aspiration 100 in³ Komatsu Variable Geometry Turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 140 mm x 165 mm 5.51" x 6.50"
Piston displacement 15.24 ltr 930 in³
Governor Mid-range, electronic
Horsepower :
SAE J1995 - Gross 268 kW 360 HP
ISO 9249 / SAE J1349* - Net 264 kW 354 HP
Rated rpm 1900 rpm
Fan drive type Hydraulic
Lubrication system :
Method Gear pump, force lubrication
Filter Full-flow
*Net horsepower at the maximum speed of radiator cooling fan: 239 kW 320 HP
**EPA Tier 4 Final emissions certified
TORQFLOW Transmission
Komatsu's automatic TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase, torque converter with lockup clutch, and a planetary gear, multipledisc clutch transmission which is hydraulically actuated and force-lubricated for optimum heat dissipation. Equipped with gearshift lock lever and neutral safety switch.
Travel speed:
1st Gear forward 3.8 km/h 2.4 mph
1st Gear reverse 4.6 km/h 2.9 mph
2nd Gear forward 5.6 km/h 3.5 mph
2nd Gear reverse 6.8 km/h 4.2 mph
3rd L Gear forward 7.5 km/h 4.7 mph
3rd L Gear reverse 9.2 km/h 5.7 mph
3rd Gear forward 11.6 km/h 7.2 mph
3rd Gear reverse 14.0 km/h 8.7 mph
Final Drive
Double-reduction, spur and planetary final drives increase tractive effort. Segmented sprockets are bolt-on for easy in-the-field replacement.
Steering System
PCCS lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to the left to make a left turn. Tilt it to the right for a right turn.

Hydrostatic steering system (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gearshift lock lever also applies parking brakes.
Minimum turning radius 2.14 m 7'0"
Undercarriage
Suspension: Oscillation-type with equalizer bar and forward mounted pivot shafts

Track roller frame: Monocoque, high-tensilestrength steel construction

K-Bogie undercarriage
Lubricated track rollers are resiliently mounted the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.

Track shoes
Lubricated tracks. Unique dust seals for preventing entry of foreign abrasives into pin-to-bushing clearance for extended service. Track tension easily adjusted with grease gun.
Number of shoes (each side) 42
Grouser height 80 mm 3.1"
Shoe width (standard/maximum) 24" / 28" 610 mm / 710 mm
Ground contact area 39955 cm² 6,193 in²
Ground pressure (tractor only) 80.3 kPa / 0.82 kg/cm² 11.6 psi
Service Refill Capacities
Fuel tank 625 ltr 165 U.S. gal
Coolant 104 ltr 27.5 U.S. gal
Engine oil 37 ltr 9.8 U.S. gal
Damper 1.5 ltr 0.4 U.S. gal
Transmission, bevel gear, and steering system 90 ltr 23.8 U.S. gal
Final drive (each side) 31 ltr 8.2 U.S. gal
DEF tank 39 ltr 10.3 U.S. gal
Hydraulic oil capacity 95 ltr 25.1 U.S. gal
Operating Weight
Tractor weight
Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment (including ROPS cab).		 632700 kg 72,100 lb
Operating weight
Including strengthened SIGMADOZER, giant ripper, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.		 40500 kg 89,300 lb
Ground pressure 99.5 kPa / 1.01 kg/cm² 14.4 psi
Hydraulic System
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control unit:
All spool control valves externally mounted beside the hydraulic tank.

Variable piston pump with capacity (discharge flow) of 325 L/min 85.9 U.S. gal for steering and 180 L/min 47.6 U.S. gal for implement at rated engine rpm.

Relief valve setting
. . . for implement 27.5 MPa 280 kg/cm² 3,980 psi
. . . for steering 38.2 MPa 390 kg/cm² 5,550 psi
Control valves:
Spool control valve for SIGMADOZER®, Semi-U tilt dozer and Full-U
Positions: Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Additional control valve required for variable digging angle multi-shank ripper and giant ripper.
Positions: Ripper lift Raise, hold, and lower
Ripper tilt Increase, hold, and decrease
Hydraulic cylinders Double-acting, piston
Number of cylinders Bore Bore
Blade Lift / 2 110 mm 4.33"
Blade Tilt (Dual tilt) / 2 160 mm 6.30"
Blade Tilt (Single Tilt) / 1 160 mm 6.30"
Ripper Lift 180 mm 7.09"
Ripper Tilt / 1 200 mm 7.87"
Hydraulic oil capacity (refill):
SIGMADOZER 95 ltr 25.1 U.S. gal
Semi-U dozer 95 ltr 25.1 U.S. gal
Full-U dozer 95 ltr 25.1 U.S. gal
Ripper equipment (additional volume):
Multi-shank ripper 37 ltr 9.8 U.S. gal
Giant ripper 37 ltr 9.8 U.S. gal

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics