get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Colby, Kansas

Are you looking for work-ready & reliable machinery to kick start a construction project in Colby ?

Whether you've been awarded a construction project already or are exploring potential tie-ups for heavy construction equipment rentals in Colby, let us tell you that we can put you in touch with the right vendors within a day or two!

Yes, we've onboard a large network of vendors with work-ready construction equipment. You can rent equipment on a daily, weekly or monthly basis, as you see fit. So, you need not spend a dime extra on equipment you acquire on a rental basis.

As soon as you call us at our toll free number or get in touch through the short contact form on the right, we will start working on finding the best vendor for you.

The process normally takes 6 to 48 hours to complete.

Equipment Rental Colby, Construction equipment rental Colby, Construction Colby, Heavy Equipment Rental Colby.

Unable to parse entered address. API response code: REQUEST_DENIED

When selecting a Scissor Lift Rental unit in Dayton, there is a multitude of factors that need attention. Just knowing the weight of the objects to be carried by the forklift is not enough. You must also determine the lift height, calculate the required turning radius, and also pay attention to the benefits of renting over purchasing.

But as simple as these things may sound, the process is complicated. Many managers may have to rely upon opinions given by forklift operators. Alternately, you can seek advice from experts at HeavyRentals.Equipment. We have an experienced team on board who can match you against the best Scissor Lift Rental companies in Dayton. They can give you an accurate idea of the capacity of the different brands and their machines.

We make it more convenient for our clients to get access to reliable Scissor Lift Rental in Dayton. We do this in two simple ways - depending upon your requirement, we can ask some pre-screened vendors in your area to get in touch with you, or we can provide you with their contact details, and help you establish direct contact with them. You choose!

We have a network of vendors with presence in more than 5,000 US locations. So, irrespective of how varied your forklift requirements are or where you are located, we may be able to help you out.

When you hire forklift for rental from one of our dealers, you can be rest assured that it follows all safety standards, and has been thoroughly inspected. Our vendors also offer a pick-drop-service for forklifts.

The right forklift can greatly enhance your efficiency and a wrong decision can be a waste of time and money. Don't take that chance and call our experts right away. We will offer you the best-suited advice for your business. With our help, you will be able to choose the best Scissor Lift Rental company in Dayton in no time.

Komatsu Excavators PC360LC-10

PC360LC-10 Hydraulic Excavator

The PC360LC-10 Hydraulic Excavator with Komatsu's Tier 4 interim engine technology can save up to 10% on your fuel bill compared to the previous model and, more importantly, you won't need to stop the machine to do normal regeneration. Couple that with six working modes, Power Max, more powerful lift mode and you have an excavator that will meet any challenge you can through at it.

Engine
Model Komatsu SAA6D114E-5*
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 4.49" 114 mm
Stroke 5.69" 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Horsepower
SAE J1995 : Gross 271 HP 202 kW
ISO 9249/SAE J1349 : Net 257 HP 192 kW
Rated rpm 1950 rpm
Fan drive type Mechanical
Governor All-speed control, electronic.
*EPA Tier 4 Interim and EU Stage 3B emissions certified.
Hydraulics
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 6
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 141 U.S. gal/min 535 ltr/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 5,400 psi 380 kgf/cm²/ 37.3 MPa
Travel circuit 5,400 psi 380 kgf/cm² / 37.3 MPa
Swing circuit 4,050 psi 285 kgf/cm²/ 27.9 MPa
Pilot circuit 470 psi 33 kgf/cm² / 3.2 MPa
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 5.5" x 58.3" x 3.9" 140 mm x 1480 mm x 100 mm
Arm / 1 6.3" x 71.9" x 4.3" 160 mm x 1825 mm x 110 mm
Bucket / 1 - for 3.2 m 10'5" and 4.0 m 13'2" Arms 5.5" x 50.6" x 3.9" 140 mm x 1285 mm x 100 mm
Bucket / 1 - for 2.54 m 8'4" Arm 5.9" x 50.6" x 4.3" 150 mm x 1285 mm x 110 mm
Drives & Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 66,191 lb 290 kN / 29570 kgf
Gradeability 35° 70%
Maximum travel speed: (Auto-Shift)
High 3.4 mph 5.5 km/h
Mid 2.8 mph 4.5 km/h
Low 2.0 mph 3.2 km/h
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method: Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 9.5 rpm
Swing torque 82,313 ft. lbs. 11386 kg•m
Undercarriage
Center frame X-frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
Number of shoes 48 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 159.8 U.S. gal 605 ltr
Coolant 9.7 U.S. gal 37 ltr
Engine 9.2 U.S. gal 35.0 ltr
Final drive, each side 2.4 U.S. gal 9.0 ltr
Swing drive 3.6 U.S. gal 13.7 ltr
Hydraulic tank 49.7 U.S. gal 188 ltr
Hydraulic system 96.4 U.S. gal 365 ltr
Operating Weight (approximate)
Operating weight includes 6500 mm / 21'3" one-piece HD boom, 3185 mm / 10'5" arm, SAE heaped 1.96 m³ / 2.56 yd³ bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Shoes 28" 700 mm
Operating Weight 78,255 lb 35496 kg
Ground Pressure 8.31 psi 0.59 kg/cm²
Shoes 31.5'' 800 mm
Operating Weight: 79,093 lb 35876 kg
Ground Pressure 7.40 psi 0.52 kg/cm²
Shoes 33.5" 850 mm
Operating Weight: 79,930 lb 36255 kg
Ground Pressure 7.00 psi 0.50 kg/cm²
Component Weights
Arm including bucket cylinder and linkage:
3185 mm / 10'5" arm assembly 3,882 lb 1761 kg
4020 mm / 13'2" arm assembly 4,383 lb 1988 kg
One piece HD boom including arm cylinder:
6500 mm / 21'3" boom assembly 6,912 lb 3135 kg
Boom cylinders x 2 571 lb 259 kg
Counterweight 15,631 lb 7090 kg
1.96 m³ / 2.56 yd³ bucket - 54" width 3,425 lb 1554 kg

Komatsu Excavators PC4000-6
PC4000-6 Mining Shovel

Productivity is the name of the game in the mining business, and the PC4000-6 Mining Shovel excavators is the machine miners turn to when they need to load 150 to 240 ton trucks. The PC4000-6 with 1875 hp can be configured as a shovel or backhoe, depending on the job.

Diesel Drive
The integrated engine oil and filter system combining the oil stabilizing systems, Reserve and Centinel, with Eliminator oil filter extends the oil change interval up to 4000 hours based on oil analysis. The high capacity Mesabi engine radiators are cooled by a hydraulically driven fan for superior cooling efficiency.
Model Komatsu SDA16V160E-2 Tier 2
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged and aftercooled
Number of cylinders 16
Rated power (SAE 1995/J1349) @ 1800 rpm 1,875 HP 1400 kW
Governor All-speed, electronic
Hydraulic System
The power train consists of one main drive. One gearbox drives four identical pumps which draw hydraulic oil from an unpressurized hydraulic tank. Open circuit hydraulics provide maximum cooling and filtering efficiency.The four-circuit system features a load-limiting governor with oil delivery summation to the working circuits and incorporates pressure cut-off control. Hydropilot prioritizes hydraulic flow giving smooth hydraulic response, simple hydraulic system layout, and a reduced number of components. The hydraulic system includes large swing-out vertical air-to-oil hydraulic coolers with temperature regulated hydraulically driven fans.
Rated flow (total output) 1,096 U.S. gpm 4140 ltr/min
Relief valve setting 4,495 psi 310 bar
Swing flow rate 420 U.S. gpm 1590 ltr/min
High pressure in line filters one per pump located at the valve blocks 200 microns
Full flow return line filters (5 double) at head of hydraulic tank 10 microns
Case drain return line filters (one double element) 3 microns
Travel and Brake System
Travel control 2 foot pedals
Gradeability Up to 50%
Travel speed (maximum) 1.3 mph 2.1 km/h
Service brake Hydraulic brake
Parking brake Wet multiple-disc brake
Swing System
Hydraulic motors and drives 2
Swing brake, service Hydraulic
Swing brake, parking Wet, multiple disc
Swing ring teeth External
Swing speed (maximum) 4.0 rpm
Undercarriage
The undercarriage consists of one center carbody and two track frames, each side attached by 38 high torque bolts.
Center frame H-type
Track frame Steel box-section
Crawler Assembly
Track adjustment Automatic hydraulic type
Number of track shoes (each side) 49
Number of top rollers (each side) 3
Number of bottom rollers (each side) 7
Electrical System (Diesel Version)
System 24 V
Batteries (series/parallel) 2 x 2 x 12 V
Standard working lights 14 Xenon lights
Standard service lights throughout platform
Electric Drive
Type Squirrel-cage induction motor
Power output 1350 kW
Voltage 6,000 - 7,200 V*
Amperage (approximate) 145 A - 120 A
Start-up Soft start
Frequency standard 60 Hz @ 1800 rpm
Frequency option 50 Hz @ 1500 rpm
*Other voltages available on request.
Automatic Centralized Lubrication
Two hydraulically powered Lincoln single line automatic lubrication systems are provided as standard, complete with time and volume variable controls. The central lube grease system is supplied from a refillable 200 liter 53 gal barrel. A second, identical system supplies open gear lubricant to the swing ring teeth through a lube pinion. Replenishment of the containers is through the Wiggins connections on the service arm.
Service Refill Capacities
Hydraulic oil tank 1,030 U.S. gal 3900 ltr
Hydraulic system 1,559 U.S. gal 5900 ltr
Fuel 1,691 U.S. gal 6400 ltr
Engine coolant 125 U.S. gal 475 ltr
Engine oil 77 U.S. gal 290 ltr
Centinel engine oil make up tank 122 U.S. gal 460 ltr
Operator Cab
The large and comfortable cab is mounted on 18 viscous damping pads and sound insulated. The cab has an automatic climate control and is pressurized. The operator's seat is air suspended, electrically heated and has a lap seat belt and offers multiple adjustments. The trainer seat is also equipped with a lap seat belt. Low-effort joystick controls are electric over hydraulic with foot controls for front shovel clam, crawler and swing brake. Full instrumentation, KOMTRAX Plus and an AM/FM radio with MP3 ready CD player is fitted. The windshield wash wiper has two speeds and intermittent operation. Amenities include a refrigerator and storage cabinets. Powered and heated mirrors are adjusted from inside the cab. External metal sun blinds on the cab side window and internal roller blinds on all windows are standard. The left hand window is an emergency exit. All windows are tinted parsol green.
Cab engineering standards are:
ISO 3449 Falling Objects Protection Structure (FOPS Level II)
ISO 6396 Noise in operator's cab is 75 dB(A)
ISO 2631-1 Whole body vibration and shock below 0.5 m/s²
ISO 5349-1 Hand-lever vibration lower 2.5 m/s²
ISO 10263-4 Heating and air conditioning second heater and air conditioner as option
Vehicle Monitoring System
KOMTRAX Plus is designed for Komatsu mining equipment to provide real time information about the operating status of the machine via a colored display. The integrated digital storage provides a full event history and trend data, which can be downloaded by laptop, optional are W-LAN or satellite modem.
Operating Weights (approximate)
PC4000 Backhoe: Operating weight including 9750 mm / 32'0" boom, 4500 mm / 14'9" stick, 22 m³ / 29.0 yd³ backhoe bucket, operator, lubricant, coolant, 1/3 fuel and standard equipment.
Shoe Width: Operating Weight: Ground Pressure:
47'' / 1200 mm backhoe 869,200 lb / 394 t 31.3 psi / 21.6 N/cm²
59'' / 1500 mm backhoe 879,800 lb / 399 t 25.4 psi / 17.5 N/cm²

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics