get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Palmyra, Maine

In the construction industry, one of the best ways to free up your company's capital is to opt for a rental model for heavy construction equipment in Palmyra. Heavy machinery demands a big chunk of investment even if you buy the basic equipment, and needless to mention, routine upkeep can be very costly in case construction projects are not lined up at all times; idle machinery in itself is a cost you cannot ignore.

With construction equipment rental service in Palmyra, you only incur machinery expenses
when you rent them for an ongoing job. So, you are completely free from the ever growing costs of construction equipment ownership. The money you save here can be used for numerous other business expenses or for expansion.

Make a smart decision today. Dial our toll free number and speak to vendors in our network within hours!

You can also contact us through the contact-form (on the right). Expect a response within minutes on a working day!

Equipment Rental Palmyra, Construction equipment rental Palmyra, Construction Palmyra, Heavy Equipment Rental Palmyra.

Unable to parse entered address. API response code: REQUEST_DENIED

JCB Light Equipment D Pick

D Pick

This light demolition and construction hammer is ideal for trenching, tunnelling and lateral work.

  • Choice of 20 l/min or 30 l/min flow rate models
  • Weight 15 kg
  • Vibration (BS8622-5) 6 m/s2
  • Vibro damped handle provides one of the lowest vibration levels of any equivalent breaker
  • Sealed hydraulic system results in low noise (no exhaust port) and elimination of freezing problems
  • Very robust cast steel construction for maximum strength and durability
  • High reliability and long service life - only two moving parts and constant lubrication by hydraulic oil
Fuel Tank
Fuel Tank Size 400gallons (8000litres)
Fuel Tank Type Diesel
Engine
Capacity 3cc

Komatsu Forklift FH Series
FH Series IC Pneumatic

This new diesel hydrostatic drive family achieves its durability and low costs of ownership from its rugged designs and field proven components. With Komatsu's hydrostatic drive system, standard wet disc brakes, and Closed-center Load Sensing hydraulic system (CLSS), the FH series achieves reduced costs of operation and reduced maintenance costs. The FH series lowers your cost of operation in a variety of demanding, high-cycle operations. Also equipped with KOMTRAX - Komatsu's exclusive information data management system.

General
GENERAL FH40-1 FH45-1 FH50-1
Power Type Diesel Diesel Diesel
Operation Type Sit-Down Sit-Down Sit-Down
Rated Capacity 9,000 lbs 10,000 lbs 11,000 lbs
Rated Load Center 23.6 in 23.6 in 23.6 in
Load Distance, Front Axle to Fork Face 22.8 in 23.2 in 22.6 in
Wheelbase 78.7 in 78.7 in 78.7 in
Weight
WEIGHT FH40-1 FH45-1 FH50-1
Service Weight 13,867 lbs 15,256 lbs 16,270 lbs
Axle Loading Loaded Front 13,228 lbs 21,958 lbs 54,086 lbs
Loaded Rear 2,844 lbs 3,285 lbs 3,208 lbs
Unloaded Front 5,710 lbs 6,063 lbs 6,393 lbs
Unloaded Rear 8,157 lbs 9,193 lbs 9,877 lbs
Tires
TIRES FH40-1 FH45-1 FH50-1
Tire Type Pneumatic Pneumatic Pneumatic
Tire Size Front 300 - 15 - 18PR (I) 300 - 15 - 18PR (I) 300 - 15 - 18PR (I)
Rear 7 - 12 - 12PR (I) 7 - 12 - 14PR (I) 7 - 12 - 14PR (I)
Number of Wheels, Front/Rear 2x / 2 2x / 2 2x / 2
Tread Front 48.2 in 48.2 in 48.2 in
Rear 44.1 in 44.1 in 44.1 in
Dimensions
DIMENSIONS FH40-1 FH45-1 FH50-1
Tilting Angle, Forward/Backward 6 / 12 deg 6 / 12 deg 6 / 12 deg
Mast Height Lowered 82.9 in 86.8 in 86.8 in
Extended 162.6 in 162.6 in 171.1 in
Free Lift Height 5.9 in 5.7 in 5.5 in
Standard Lift Height 118.1 in 118.1 in 118.1 in
Height Overhead Guard 88.2 in 88.2 in 88.2 in
Length, with Standard Forks 88.2 in 168.1 in 173.4 in
Length to Fork Face 124 in 126 in 125.4 in
Overall Width at Drive Tires 59.8 in 59.8 in 59.8 in
Forks, Thickness x Width x Length 2.2 x 5.9 x 42.1 in 2.2 x 5.9 x 42.1 in 2.2 x 5.9 x 48 in
Carriage Width/ITA Class 46.9 in / III 46.9 in / III 50 in / III
Ground Clearance, Under Mast 5.7 in 5.7 in 5.7 in
Ground Clearance, Center of Wheelbase 8.3 in 8.3 in 8.3 in
Aisle Width L1000 x W1200 pallet 184.8 in 187.2 in 193.7 in
L1200 x W800 pallet 190 in 192.3 in 193.7 in
Turning Radius, Outside 112 in 114 in 115.2 in
Performance
PERFORMANCE FH40-1 FH45-1 FH50-1
Travel Speed, Loaded/Unloaded 14.6 / 14.6 mph 14.6 / 14.6 mph 14.6 / 14.6 mph
Lifting Speed, Loaded/Unloaded 95.8 / 99.4 fpm 82.7 / 86.6 fpm 82.7 / 86.6 fpm
Lowering Speed, Loaded/Unloaded 98.4 / 98.4 fpm 98.4 / 98.4 fpm 98.4 / 98.4 fpm
Maximum Drawbar Pull, Loaded 7,644 lbs 7,644 lbs 7,868 lbs
Maximum Gradeability 33% 29% 28%
Service Brake, Operation/Control Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic
Parking Brake, Operation/Control Hand / Mechanical Hand / Mechanical Hand / Mechanical
Steering Type FHPS FHPS FHPS
Drive
DRIVE FH40-1 FH45-1 FH50-1
Engine Manufacturer / Engine Model Komatsu SAA4D95LE-5 Komatsu SAA4D95LE-5 Komatsu SAA4D95LE-5
Rated Output (SAE Net) 68.1 HP @2,150 rpm 68.1 HP @2,150 rpm 68.1 HP @2,150 rpm
Maximum Torque (SAE Net) 212 lb-ft @ 1,400 rpm 212 lb-ft @ 1,400 rpm 212 lb-ft @ 1,400 rpm
# of Cylinders / Displacement 4 / 199 cu in 4 / 199 cu in 4 / 199 cu in
Fuel Tank Capacity 27.7 US Gallons 27.7 US Gallons 27.7 US Gallons
Other
OTHER FH40-1 FH45-1 FH50-1
Battery, Voltage/Capacity 24 V / 52 Ah 5hr 24 V / 52 Ah 5hr 24 V / 52 Ah 5hr
Relief Pressure, Maximum 2,988 psi 2,988 psi 2,988 psi
Hydraulic Tank Capacity 21.9 US Gallons 21.9 US Gallons 21.9 US Gallons
Transmission Hydrostatic Hydrostatic Hydrostatic

New Holland Wheeled Excavators WE 170B PRO

Specifications
Engine Power 105 kW/141 hp
Operating weight 17.2/18.1 t

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics