get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Eldon, Missouri

Finding cost-effective and reliable rentals of earth moving and construction equipment in Eldon or elsewhere is no easy task. This is especially true for construction companies and contractors who do not have the luxury of a strong credit line or healthy cash flow.

Whether you are a first time contractor looking for machinery from boom lifts to loaders or a represent a company that has been executing construction projects in the region for many years now, you'd agree that renting heavy construction equipment is one of the best ways to minimize immediate liabilities today.

No matter how limited or vast your equipment requirements at the jobsite are, our network of vendors has got you covered. You can reach out front desk at the toll free number or just post an online query through the contact form (on the right).

We will learn about your requirements and put you in touch with the right vendor in no time.

Equipment Rental Eldon, Construction equipment rental Eldon, Construction Eldon, Heavy Equipment Rental Eldon.

Unable to parse entered address. API response code: REQUEST_DENIED

John Deere Wheel Loader 524K High-Lift Tier 3
ThinK. Again.

Although they don't appear all that different from their standard-setting predecessors, the K-Series Loaders are loaded throughout with even more customer-inspired enhancements: spacious, quieter cab with unsurpassed visibility, expanded sealed-switch module, secured key-less start, and easier-to-read LCD monitor with advanced onboard diagnostics.

You have more choices, too, including the 2¾-yard 524K, NeverGreaseTM pins, and automatic diff-lock axles, to list just a few. Exceptional productivity, long-term durability, unparalleled versatility - you get it all in the John Deere K-Series.

ENGINE
Engine Make / Engine Model John Deere / PowerTech E6068H
Emission Rating Tier 3
Net Power, kW (hp) @ Rated rpm 110 (146) @ 2000
Displacement, L (cu in) 6.8 (415)
Net Peak Torque, N-m (lb-ft) 607 (448)
Calculated % Torque Rise 47
ELECTRICAL
Voltage 24
Alternator amps 80
TRANSMISSION
Type Powershift
Max. Travel Speed - fwd, kph (mph) 36 (22.4)
Max. Travel Speed - rev, kph (mph) 24.1 (15)
DIFFERENTIAL
Traction Device - Front / Rear F: 100 / R: Open
FINAL DRIVE
Front Axle Type Planetary - Inboard
Rear Axle Type Planetary - Inboard
SERVICE BRAKES
Service Brakes Type Wet Disc
Service brake location Axle Inboard
Service brake actuation Hydraulic
HYDRAULIC SYSTEM
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 165 (44)
System Pressure, kPa (psi) 24994 (3625)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) 1.9 (2.5)
Bucket Capacity Max., cu m (cu yd) 2.1 (2.75)
Breakout Force, Std Bucket, kN (lb) 83.3 (18748)
Ride Control Optional
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 2.1 (2.75)
Tire Size Standard 20.5 R25
TIPPING LOAD
Straight, kg (lb) 8851 (19512)
Full Turn, kg (lb) 7656 (16879)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 4120 (13 ft 6 in)
Dump Clear @ 45 deg, mm (ft in) 3120 (10 ft 3 in)
Reach @ 7', mm (ft in) 1730 (5 ft 8 in)
Reach @ Full Height, mm (ft in) 990 (3 ft 3 in)
Wheelbase, mm (ft in) 2930 (9 ft 7 in)
Clearance Circle, mm (ft in) 12080 (39 ft 8 in)
Overall Length, mm (ft in) 7670 (25 ft 2 in)
Height to Top of Cab, mm (ft in) 3250 (10 ft 8 in)
Ground Clearance, mm (in) 460 (18)
CAPACITIES
Fuel Tank, L (gal) 242 (64)
Hydraulic Reservoir, L (gal) 92 (24.3)
WEIGHT
SAE Operating Weight, kg (lb) 12623 (27829)
Metric Ton Weight, kg (lb) 12.623 (27.829)

Komatsu Wheel Loaders WA320-7
WA320-7 Wheel Loader

The WA320-7 marries a well proven hydrostatic drivetrain with Komatsu's industry leading Tier 4 interim engine technology that reduces fuel economy by up to 10%. The WA320-7 has a parallel lift boom with 10% more lift than the previous model and z-bar linkage for high breakout force for digging.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed, electronic
Horsepower:
Gross - SAE J1995 170 HP 127 kW
Net - ISO 9249/SAE J1349 165 HP 123 kW
Rated rpm 2100 rpm
Max power - ISO 14396 @ 1900 rpm 173 HP 129 kW
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Transmission Hydrostatic, 1 pump, 2 motors with speed range select
Travel speed Forward Reverse
1st 0.6 - 8.1 mph 0.6 - 8.1 mph
2nd 8.1 mph 8.1 mph
3rd 11.6 mph 11.6 mph
4th 23.6 mph 23.6 mph
Measured with 20.5-25 tires
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 24° total oscillation
Reduction gear Spiral bevel gear
Differential gear Torque proportioning
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet, multi-disc brake on transfer output shaft.
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 38.5° each direction (40° to max end stop)
Minimum turning radius at the center of outside tire 17'8" 5380 mm
Hydraulic System
Steering system:
Hydraulic pump Gear type pump
Capacity (at rated rpm) 29.1 U.S. gal/min 110 ltr/min
Relief valve setting 2,700 psi 18.6 MPa 190 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders 2
Bore x stroke 2.8" x 17.8" 70 mm x 453 mm
Loader control:
Hydraulic pump Gear type pump
Capacity 20.6 U.S. gal/min 78 ltr/min
Relief valve setting 3,000 psi 20.6 MPa 210 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke bore x stroke
Boom cylinder / 2 5.1" x 28.2" 130 mm x 717 mm
Bucket cylinder / 1 5.9" x 19.3" 150 mm x 491 mm
Control valve 3-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.7 sec
Dump 1.6 sec
Lower (Empty) 3.3 sec
Service Refill Capacities
Cooling system 6.1 U.S. gal 23 ltr
Fuel tank 64.7 U.S. gal 245 ltr
Engine 6.1 U.S. gal 23 ltr
Hydraulic system 23.7 U.S. gal 90 ltr
Axle front 7.1 U.S. gal 27 ltr
Axle rear 6.7 U.S. gal 25.5 ltr
Transfer case 1.5 U.S. gal 5.8 ltr

John Deere Wheel Loader 304K
Performance meets convenience.

Convenience is key when it comes to productivity. With an 8,091 lb. full-turn tipping load, 3 ft. 1-in. reach, and 11 ft.-1 in. height to hinge pin, the 304K John Deere Compact Loader is an efficient alternative to skid steers for loading trucks or placing pallets. The standard-equipped canopy provides quick entrance/exit to their weatherproof interior, and a low profile enables easy access to close quarters. Ask your dealer about the low-cost, highly productive 304K Compact Loader today.

ENGINE
Emission Rating Interim Tier 4
Engine Make / Engine Model YANMAR / 4TNV98
Net Power, kW (hp) @ Rated rpm 48 (64) @ 2400
Displacement, L (cu in) 3.3 (203)
Net Peak Torque, N-m (lb-ft) 239 (176)
Calculated % Torque Rise --
ELECTRICAL
Voltage 12
Alternator amps 80
TRANSMISSION
Type Hydrostatic
Max. Travel Speed - fwd, kph (mph) 20 (12)
Max. Travel Speed - rev, kph (mph) 20 (12)
DIFFERENTIAL
Traction Device - Front / Rear F: 45 / R: 45
FINAL DRIVE
Front Axle Type Planetary - Outboard
Rear Axle Type Planetary - Outboard
SERVICE BRAKES
Service Brakes Type Wet Disc
Service brake location All Wheels
Service brake actuation Hydraulic
HYDRAULIC SYSTEM
Pump Type Gear
Pump Flow, L/min (gpm) 77 (20)
System Pressure, kPa (psi) 23000 (3335)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) 0.8 (1)
Bucket Capacity Max., cu m (cu yd) 1.6 (2.1)
Breakout Force, Std Bucket, kN (lb) 52.6 (11839)
Ride Control No
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 0.8 (1)
Tire Size Standard 405 / 70 R18
TIPPING LOAD
Straight, kg (lb) 4000 (9171)
Full Turn, kg (lb) 3670 (8091)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 3370 (11 ft 1 in)
Dump Clear @ 45 deg, mm (ft in) 2620 (8 ft 7 in)
Reach @ 7', mm (ft in) 1600 (5 ft 3 in)
Reach @ Full Height, mm (ft in) 930 (3 ft 1 in)
Wheelbase, mm (ft in) 2150 (7 ft 1 in)
Clearance Circle, mm (ft in) 9110 (29 ft 11 in)
Overall Length, mm (ft in) 5280 (17 ft 4 in)
Height to Top of Cab, mm (ft in) 2470 (8 ft 1 in)
Ground Clearance, mm (in) 330 (13)
CAPACITIES
Fuel Tank, L (gal) 50 (13.2)
Hydraulic Reservoir, L (gal) 90 (23.8)
WEIGHT
SAE Operating Weight, kg (lb) 5796 (12778)
Metric Ton Weight, kg (lb) 5.796 (12.778)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics