Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Taneyville, Missouri

Finding cost-effective and reliable rentals of earth moving and construction equipment in Taneyville or elsewhere is no easy task. This is especially true for construction companies and contractors who do not have the luxury of a strong credit line or healthy cash flow.

Whether you are a first time contractor looking for machinery from boom lifts to loaders or a represent a company that has been executing construction projects in the region for many years now, you'd agree that renting heavy construction equipment is one of the best ways to minimize immediate liabilities today.

No matter how limited or vast your equipment requirements at the jobsite are, our network of vendors has got you covered. You can reach out front desk at the toll free number or just post an online query through the contact form (on the right).

We will learn about your requirements and put you in touch with the right vendor in no time.

Equipment Rental Taneyville, Construction equipment rental Taneyville, Construction Taneyville, Heavy Equipment Rental Taneyville.

Unable to parse entered address. API response code: REQUEST_DENIED

 Komatsu Dozer D155AX-7 WH
D155AX-7 WH
The D155AX-7WH is a dozer that bridges the gap between contractor site prep dozers and large contractor production/mining dozers. The Tier 4 interim D155AX-7WH has the precise and responsive hydraulic control and smooth turning of hydrostatic steering of smaller dozers for grading and big dozer features like a lock-up torque converter, Unique, high production Sigma dozer blade and K-bogie oscillating undercarriage.

Engine
Model Komatsu SAA6D140E-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 5.51" x 6.50" 140 mm x 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed and mid-range, electronic
Horsepower :
SAE J1995 - Gross 360 HP 268 kW
ISO 9249 / SAE J1349 - Net 354 HP 264 kW
Rated rpm 1900 rpm
Fan drive type Hydraulic
Lubrication system :
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed:
1st Gear forward 2.4 mph 3.8 km/h
1st Gear reverse 2.9 mph 4.6 km/h
2nd Gear forward 3.5 mph 5.6 km/h
2nd Gear reverse 4.2 mph 6.8 km/h
3rd L Gear forward 4.7 mph 7.5 km/h
3rd L Gear reverse 5.7 mph 9.2 km/h
3rd Gear forward 7.2 mph 11.6 km/h
3rd Gear reverse 8.7 mph 14.0 km/h
Final Drive
Double-reduction, spur and planetary final drives increase tractive effort. Segmented sprockets are bolt-on for easy inthe- field replacement.
Steering System
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to the left to make a left turn. Tilt it to the right for a right turn.

Hydrostatic Steering System (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gearshift lock lever also applies parking brakes.

Minimum turning radius 7'0" 2.14 m
Undercarriage
K-Bogie undercarriage
Lubricated track rollers are resiliently mounted on the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.Track shoes
Lubricated tracks. Unique dust seals for preventing entry of foreign abrasives into pin-to-bushing clearance for extended service. Track tension easily adjusted with grease gun.
Suspension Oscillation-type with equalizer bar and forward mounted pivot shafts
Track roller frame Monocoque, high-tensilestrength steel construction
Rollers and idlers Lubricated
Number of shoes (each side) 42
Grouser height 3.1" 80 mm
Shoe width (standard/maximum) 610 mm / 710 mm 24" / 28"
Ground contact area 6,193 in² 39955 cm²
Ground pressure (tractor only) 11.9 psi 82.4 kPa / 0.84 kg/cm²
Number of track rollers (each side) 7
Number of carrier rollers (each side) 2
Service Refill Capacities
Fuel tank 165 U.S. gal 625 ltr
Coolant 27.3 U.S. gal 103.5 ltr
Engine oil 9.8 U.S. gal 37 ltr
Damper 0.4 U.S. gal 1.5 ltr
Hydraulic oil 24.2 U.S. gal 91.5 ltr
Transmission, bevel gear, and steering system 23.8 U.S. gal 90 ltr
Final drive (each side) 8.2 U.S. gal 31 ltr
Operating Weight
Tractor weight
Including rated capacity of lubricant, coolant, full fuel tank, operator and standard equipment.Operating weight
Including strengthened SIGMADOZER®, giant ripper, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
Tractor weight 68,350 lb 31000 kg
Operating weight 87,100 lb 39500 kg
Ground pressure 15.4 psi 106 kPa / 1.08 kg/cm²
Hydraulic System
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control unit:
All spool control valves externally mounted beside the hydraulic tank. Variable piston pump with capacity (discharge flow) of 325 ltr/min 85.9 U.S. gal/min for steering and 180 ltr/min 47.6 U.S. gal/min for implemented at rated engine rpm.

Relief valve setting
. . . for implement 27.5 MPa 280 kg/cm² 3,980 psi
. . . for steering 38.2 MPa 390 kg/cm² 5,550 psi

Control valves:
Spool control valve for SIGMADOZER®, Semi-U tilt dozer and Full-U
Positions: Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Additional control valve required for variable digging angle multi-shank ripper and giant ripper.
Positions: Ripper lift Raise, hold, and lower
Ripper tilt Increase, hold, and decrease
Hydraulic cylinders Double-acting, piston
Number of cylinders Bore Bore
Blade Lift / 2 4.33" 110 mm
Blade Tilt (Dual tilt) / 2 6.30" 160 mm
Blade Tilt (Single Tilt) / 1 6.30" 160 mm
Ripper Lift 7.09" 180 mm
Ripper Tilt / 1 7.87" 200 mm
Hydraulic oil capacity (refill):
SIGMADOZER 22.5 U.S. gal 85 ltr
Semi-U dozer 22.5 U.S. gal 85 ltr
Full-U dozer 22.5 U.S. gal 85 ltr
Ripper equipment (additional volume):
Multi-shank ripper 9.8 U.S. gal 37 ltr
Giant ripper 9.8 U.S. gal 37 ltr

John Deere Scraper Systems 1810E
1810E
The 1810E Ejector Scraper is a four-tire scraper that carries 18 cu yd of material and has a 10-ft cutting width. This scraper works well for bulk-hauling construction contractors needing a narrow transport scraper. The 1810E requires at least 360 hp to pull in single, tandem, or triple scraper formation.

CAPACITY
Struck capacity cubic yards 12.5 cu yd
Heaped capacity cubic yards 18.3 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 29 ft 8 in. 9042 mm
Width, ft, in. (mm) 11 ft 3632 mm
Height, ft, in. (mm) 6 ft 7 in. 2007 mm
Bucket dimensions --
Length, ft, in. (mm) 9 ft 2 in. 2794 mm
Width, ft, in. (mm) 10 ft 6 in. 3200 mm
Height, ft, in. (mm) 4 ft 1321 mm
WEIGHT
Approximate shipping weight, lb (kg) 22,500 lb 10,205 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 26%
Wheels 74%
TIRES
Number of tires per scraper 4
Tire sizes --
Standard 20.5 X 25
Option 1 NA
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 360 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Yes
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Optional
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads Yes

Flatbed Trailers 1012

JLG Flatbed Trailers 1012
Key Specs

  • Deck Capacity: 10000 lb / 4535.92 kg
  • Deck Length: 12 ft / 3.66 m
  • Deck Width: 5 ft 10 in. / 1.78 m

Key Features

  • Exclusive Power Deck® system
  • Deck raises and lowers in 15 seconds
  • Single-lever hydraulic control
Dimensional Data
Deck Capacity 10000 lb / 4535.92 kg
Deck Length 12 ft / 3.66 m
Deck Width 5 ft 10 in. / 1.78 m
Trailer Length 17 ft / 5.18 m
Trailer Wheel Size 1 ft 4 in. / 0.41 m
General
Axle Tandem
Brakes Electric
Hitch - Ball Size 2-5/16"
Lift Mechanism Hydraulic
Trailer Weight 3010 lb / 1365.31 kg

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics