Fill out our form - takes 30 seconds - Enjoy Competing Quotes
Construction Equipment Rental in Cofield, North-Carolina
We have been a preferred choice for numerous contractors in the region for we make it a point to deliver valuable service, every time. Why contractors choose our vendors for construction equipment rentals in Cofield .
The equipment is updated on a regular basis; old machines are sold as used equipment and replaced with new equipment fleet
Any heavy construction equipment you need can be delivered directly at the jobsite; the entire process is quick and hassle free
Since all machines and tools are in good condition, you can start using them the moment they are assembled or delivered at the site
Our vendors are experts at matching the right construction equipment to a given project. Dial our toll free number today and learn about their fleet today!
You can also submit an online query through the contact form (on the right) if you cannot call right now.
Equipment Rental Cofield, Construction equipment rental Cofield, Construction Cofield, Heavy Equipment Rental Cofield.
Unable to parse entered address. API response code: REQUEST_DENIED
Superior grading tractor and much more.
Introducing the latest versions of the highly popular “210". Widely acclaimed as the best industrial-strength loader you can run - grading contractors, paving crews, and landscapers have had our number. But if you think the new K-Series are just great grading machines, you're only scratching the surface of their potential. At 66 kW (88 hp), the 210K Tractor Loader from John Deere brings plenty of ability to a wide variety of tasks. Equip yours with an optional four-season cab, single-lever loader-control with integrated electrohydraulic control for auxiliary (3rd function) loader hydraulics, multipurpose bucket, 41-kW (55 hp) hydromechanical PTO rated at 540 rpm, dual-tilt cylinders for optimal paving & grading productivity in every direction, and limited-slip mechanical-front-wheel-drive axle, and you'll be ready and able for whatever work comes your way. Delivering more pulling power than the 210LJ it replaces, the 210K may be all the tractor loader you need.
With John Deere WorksightTM, JDLinkTM monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISORTM Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It's the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it's only available from John Deere.
ENGINE
Emission Rating
Interim Tier 4
Engine Make / Engine Model
John Deere / PowerTech E 4045HT073
Net Power, kW (hp) @ Rated rpm
66 (88) @ 2000
Displacement, L (cu in)
4.5 (276)
ELECTRICAL
Volts
12
Alternator amps
120
TRANSMISSION
Type
Power Shift
Speed Range - forward
4
Speed Range - reverse
2
Maximum Speed - Forward, kph (mph)
31.2 (19.4)
Maximum Speed - Reverse, kph (mph)
12.9 (8)
BRAKES
Service type
Wet Multi Disc
Actuation
Hydraulic w/Power Assist
HYDRAULIC SYSTEM
Pump Type
Gear
Pump Flow, L/min (gpm)
96 (25.3)
System pressure, kPa (psi)
18961 (2750)
MFWD
Type
Power Shift
Axle Oscillation, deg
22
LOADER AND BUCKET
SAE Heaped Capacity, cu m (cu yd)
0.77 (1)
Loader Bucket Width, mm (in)
2184 (86)
Breakout Force, kN (lb)
44.3 (9953)
Lift Capacity to Full Height, kg (lb)
2548 (5612)
Dump Clearance @ 45 deg, mm (ft in)
2670 (8 ft 9 in)
Dump Reach, mm (in)
914 (36)
Bucket Hinge Pin Max Height, mm (ft in)
3340 (11 ft )
Coupler (mechanical, hydraulic)
Standard
POWER TAKE OFF,STD/OPT
PTO
Optional
Type
Mechanical FWD
PTO Rated Speed, rpm
540
DIMENSIONS
Transport Height, mm (ft in)
2540 (8 ft 4 in)
Overall width, mm (ft in)
2130 (7 ft )
Overall Length, mm (ft in)
5230 (17 ft 2 in)
CAPACITIES
Fuel Tank, L (gal)
102.2 (27)
Hydraulic Reservoir, L (gal)
37 (9.8)
WEIGHT
SAE Operating Weight, kg (lb)
4959 (10936)
Metric Ton Weight, kg (lb)
4.959 (10.936)
Superior grading tractor and much more.
Introducing the latest versions of the highly popular "210". Widely acclaimed as the best industrial-strength loader you can run - grading contractors, paving crews, and landscapers have had our number. But if you think the new K-Series are just great grading machines, you're only scratching the surface of their potential. At 52 kW (70 hp), the economically priced 210K EP John Deere Tractor Loader brings plenty of ability to a wide variety of tasks. Equip yours with an optional four-season cab, single-lever loader-control with integrated electrohydraulic control for auxiliary (3rd function) loader hydraulics, multipurpose bucket, dual-tilt cylinders for optimal paving & grading productivity in every direction, and limited-slip mechanical front-wheel-drive axle, and you'll be ready and able for whatever work comes your way.
The 210K EP meets EPA IT4 standards without after-treatment components and DPFs, making it an excellent choice for large fleets and rental yards. With John Deere WorksightTM, JDLinkTM monitoring provides real-time machine utilization and health data, plus location information. Machine health prognostics proactively suggests maintenance to correct problems early before they turn into costly downtime. And remote diagnostics programming enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It's the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it's only available from John Deere.
ENGINE
Emission Rating
Interim Tier 4
Engine Make / Engine Model
John Deere / PowerTech E 4045HT072
Net Power, kW (hp) @ Rated rpm
52 (70) @ 2000
Displacement, L (cu in)
4.5 (276)
ELECTRICAL
Volts
12
Alternator amps
120
TRANSMISSION
Type
Power Shift
Speed Range - forward
4
Speed Range - reverse
2
Maximum Speed - Forward, kph (mph)
32.3 (20)
Maximum Speed - Reverse, kph (mph)
11.9 (7.4)
BRAKES
Service type
Wet Multi Disc
Actuation
Hydraulic w/Power Assist
HYDRAULIC SYSTEM
Pump Type
Gear
Pump Flow, L/min (gpm)
78 (20.5)
System pressure, kPa (psi)
18961 (2750)
MFWD
Type
Power Shift
Axle Oscillation, deg
22
LOADER AND BUCKET
SAE Heaped Capacity, cu m (cu yd)
0.77 (1)
Loader Bucket Width, mm (in)
2184 (86)
Breakout Force, kN (lb)
44.3 (9953)
Lift Capacity to Full Height, kg (lb)
2547 (5612)
Dump Clearance @ 45 deg, mm (ft in)
2670 (8 ft 9 in)
Dump Reach, mm (in)
914 (36)
Bucket Hinge Pin Max Height, mm (ft in)
3340 (11 ft )
Coupler (mechanical, hydraulic)
Standard
POWER TAKE OFF,STD/OPT
PTO
Optional
Type
Mechanical FWD
PTO Rated Speed, rpm
540
DIMENSIONS
Transport Height, mm (ft in)
2540 (8 ft 4 in)
Overall width, mm (ft in)
2130 (7 ft )
Overall Length, mm (ft in)
5230 (17 ft 2 in)
CAPACITIES
Fuel Tank, L (gal)
102.2 (27)
Hydraulic Reservoir, L (gal)
37 (9.8)
WEIGHT
SAE Operating Weight, kg (lb)
4707 (10379)
Metric Ton Weight, kg (lb)
4.707 (10.379)
Shift productivity into a higher gear.
The new 310K Backhoe is all about delivering what you want. The EPA IT4/EU Stage IIIB technology is simple, fuel efficient, fully integrated, and fully supported. Choose from pilot, two-lever, three-lever, four-lever, or SAE excavator-style controls. Smooth response and low effort are yours regardless of which you select. It also boasts enhancements such as a more efficient HVAC system and machine-security system. Redesigned easier-to-clean cooling package. Quarter cab option for easy jobsite communication. Plus, our 310K backhoe comes standard with JDLinkTM and Service ADVISORTM Remote to keep your machines productive.
From the increased hood tilt that allows even easier engine access, to the tilt-out coolers that open up the cores - the 310K Backhoe Loader is loaded with features that make it as easy to maintain as it is to operate. Same-side ground-level service points help daily checks and additions go more quickly. Other commonsense features such as quick-change filters, extended service intervals, simple-to-read sight gauges, and easy-access grease zerks help increase uptime and lower daily operating costs. And because no maintenance beats low maintenance, self-adjusting serpentine belts, park brakes, and wet-disc brakes seldom, if ever, require attention. Altogether, the 310K gives you the machine you asked for.
Engine
Emission Rating
Tier 2
Engine Make / Engine Model
John Deere / PowerTech E 4045TT096
Net Power, kW (hp) @ Rated rpm
60 (80) @ 2000
Displacement, L (cu in.)
4.5 (276)
electrical
Voltage
12
Alternator amps
90
transmission
Type
Powershift
Max. Travel Speed - fwd, kph (mph)
32.8 (20.4)
Max. Travel Speed - rev, kph (mph)
12.7 (8)
Brakes
Type
Wet Multi Disc
Actuation
Hydraulic w/Power Assist
hydraulic system
Pump Type
Gear Type Pump
Pump Flow, L/min (gpm)
106 (28)
System Pressure, kPa (psi)
24993 (3625)
Backhoe, Fixed length dipperstick
Max. Digging Depth, mm (ft in)
5460 (17 ft 11 in)
2ft (0.61m) Flat Bottom, mm (ft in)
4320 (14 ft 2 in)
Reach from Swing Center, mm (ft in)
5440 (17 ft 10 in)
Truck Loading Height, mm (ft in)
3330 (10 ft 11 in)
Digging Force Crowd, kN (lb)
31.2 (7006)
Bucket, Power Dig, kN (lb)
49.4 (11106)
deere lift capacities are according to sae j31
Max. Digging Depth, mm (ft in)
5460 (17 ft 11 in)
2ft (0.61m) Flat Bottom, mm (ft in)
4320 (14 ft 2 in)
Reach from Swing Center, mm (ft in)
5440 (17 ft 10 in)
Truck Loading Height, mm (ft in)
3330 (10 ft 11 in)
Digging Force Crowd, kN (lb)
31.2 (7006)
Bucket, Power Dig, kN (lb)
49.4 (11106)
Deere figures listed are 87% of the max lift force available
Boom Lift Cap. @ Ground Level, kg (lb)
1154 (2545)
Dipperstick Lift Capacity @ 12' Height, kg (lb)
2204 (4859)
backhoe, standard bucket
SAE Heaped Capacity, cu m (cu ft)
0.18 (6.5)
Backhoe Bucket Width, mm (in)
610 (24)
Bucket Rotation, deg
190
Loader
SAE Heaped Capacity, cu m (cu yd)
0.77 (1)
Loader Bucket Width, mm (in)
2184 (7 ft 2 in)
Breakout force, kN (lb)
41.6 (9350)
Lift Capacity to Full Height, kg (lb)
2996 (6600)
Dump Clearance @ 45 deg, mm (ft in)
2690 (8 ft 10 in)
Dump Reach, mm (in)
785 (30.9)
Bucket Hinge Pin Max. Height, mm (ft in)
3380 (11 ft 1 in)
Coupler (Mechanical, Hydraulic)
Option
Two wheel drive
Wheelbase, mm (in)
2110 (6 ft 11 in)
Curb Turning Radius w/out Brakes, mm (ft in)
3940 (12 ft 11 in)
Curb Turning Radius w/ Brakes, mm (ft in)
3440 (11 ft 3 in)
Bucket Clearance Circle, dia. w/ out Brakes, mm (ft in)
5380 (17 ft 8 in)
Bucket Clearance Circle, dia. w/ Brakes, mm (ft in)
4945 (16 ft 3 in)
Four WHEEL DRIVE
Wheelbase, mm (in)
2140 (7 ft )
Curb Turning Radius w/out Brakes, mm (ft in)
4080 (13 ft 5 in)
Curb Turning Radius w/ Brakes, mm (ft in)
3580 (11 ft 9 in)
Bucket Clearance Circle, dia. w/ out Brakes, mm (ft in)
5525 (18 ft 2 in)
Bucket Clearance Circle, dia. w/ Brakes, mm (ft in)