get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Defiance, Ohio

Do you need the latest, clean and well-maintained heavy construction equipment delivered to the jobsite in Defiance?

With us, you can gain instant access to a wide selection of construction tools and machineries. Yes, since we have onboard a network of reliable vendors having a large ready-to-rent inventory of equipment, you will never to look anywhere else for heavy construction equipment rentals in Defiance.

Each time you need some extra machinery, accessories or tools, our vendors will have them delivered right to your jobsite, and on time. You may be in need of such machines and tools for just one day, a week or any length of time. Our vendors do not impose unrealistic or inflexible rental agreements on you.

Dial our toll free number today or submit the short contact form on the right to get started. Our vendors will start contacting you to learn about your exact requirements in no time.

Equipment Rental Defiance, Construction equipment rental Defiance, Construction Defiance, Heavy Equipment Rental Defiance .

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Dozers D37EX-23

D37EX-23 Crawler Dozer

Komatsu small dozers are great finish grading tractors for a lot of reasons but the most obvious is the super slant nose design. The super slant nose design moves the coolers and hydraulic fan to the rear and the operator forward to create a balance that makes fine grading with or without a grade control system a breeze. A fully hydrostatic drivetrain gives the operator incredibly quick and precise maneuverability. And new Power and Economy working modes allow the operator to adjust his machine's performance to his current job and save on fuel consumption as he's doing it. Like all Komatsu products, the D37EX-23 has the advanced hydraulics to make the addition of a grade control system seamless and turn it from a great grading tractor to an incredibly precise and fast fine grading system.

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 91 HP 68 kW
(ISO 14396 89 HP 66 kW
ISO 9249 / SAE J1349 - Net 79 HP 59 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h		 0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h		 0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h		 0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius* 79" 2.0 m
*As measured by track marks on the ground at pivot turn.
Undercarriage
Suspension Rigid track frame
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks Unique seals minimize the entry of foreign abrasive material into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with a grease gun.
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Tractor for inside mounted blade (PAT)
Number of track rollers (each side) 6
Number of carrier rollers (each side) 1
Type of shoes (standard) Single grouser
Number of shoes (each side) 41
Grouser height 1.9" 47 mm
Shoe width (standard) 18" 460 mm
Ground contact area 2,778 in² 17920 cm²
Ground pressure
(with standard shoe)		 6.39 psi 0.45 kgf/cm² / 44.1 kPa
Track gauge 5'2" 1570 mm
Length of track on ground 7'4" 2230 mm
Link pitch 6.1" 154 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 16.9 U.S. gal 64 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 16,314 lb 7400 kg
Operating weight: Operating weight: Including power angle tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 18,695 lb 8480 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min / 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3.0" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 4"
80 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

Ultra Series Telescopic Boom Lift 1850SJ

JLG Ultra Series Telescopic Boom Lift 1850SJ

 

Key Specs

  • Horizontal Outreach: 80 ft / 24.38 m
  • Platform Capacity - Restricted:  1000 lb / 453.59 kg
  • Platform Capacity - Unrestricted: 500 lb / 226.80 kg
  • Platform Height: 185 ft 7 in. / 56.57 m

Key Features

  • Much faster to full height
  • No oversized load permit needed (over weight permit is required for highway transportation)
  • Telescoping jib provides 2.9 million cubic feet of work area
  • Axles take approximately one minute to extend or retract
Power Source
Auxiliary Power 12 Volts DC
Capacity - Fuel Tank 53 gal. / 199.87 L
Engine Type - Diesel Deutz TD3.6L 99.8 HP
PERFORMANCE
Drive Speed - 4WD 3 mph / 4.51 km/h
Gradeability - 4WD 40 %
Platform Capacity - Restricted 1000 lb / 453.59 kg
Platform Capacity - Unrestricted 500 lb / 226.80 kg
Swing 360 Degrees
Swing Type Continuous
Turning Radius - Outside (axles extended) 21 ft 8 in. / 6.6 m
Turning Radius - Outside (axles retracted) 31 ft 3 in. / 9.53 m
dimensional data
Ground Clearance 1 ft 4 in. / 0.41 m
Machine Height 10 ft / 3.05 m
Machine Length 63 ft 10 in. / 19.44 m
Machine Length - Transport 47 ft 10 in. / 14.57 m
Machine Width 8 ft 2 in. / 2.49 m
Machine Width - Axles Extended 16 ft 6 in. / 5.03 m
Platform Dimension A 3 ft / 0.91 m
Platform Dimension B 8 ft / 2.44 m
Platform Height 185 ft 7 in. / 56.57 m
Tailswing 7 ft 7 in. / 2.31 m
Tire Size 445/50D710 Foam Filled
Reach specifications
Horizontal Outreach 80 ft / 24.38 m
Platform Height 185 ft 7 in. / 56.57 m
Vertical Jib Rotation 120 Degrees
GENEral
Capacity - Hydraulic Reservoir 75 gal. / 284.28 L
Ground Bearing Pressure 120 psi / 8.38 Kg/cm2
Machine Weight 60300 lb / 27351.62 kg

Articulating Boom Lifts 600AN

 

Key Specs

  • Horizontal Outreach: 39 ft 7 in. / 12.07 m
  • Platform Capacity - Restricted: 1000 lb / 453.59 kg
  • Platform Capacity - Unrestricted:  500 lb / 226.80 kg
  • Platform Height:  60 ft 5 in. / 18.42 m

Key Features

  • Best reach envelope in its class
  • Optional articulating jib gets you into hard-to-reach places
  • Unmatched maneuverability for confined work areas
  • Equipped with a fuel-efficient Tier 4 engine
Power Source
Auxiliary Power 12 Volts DC
Capacity - Fuel Tank 30 gal. / 113.56 L
Engine Type - Diesel DEUTZ TD 2.9L Tier 4 Final 67 hp
Engine Type - Dual Fuel GM Vortec 3000 MPR, 82 hp
PERFORMANCE
Axle Oscillation 8 in. / 0.2 m
Drive Speed - 2WD 14 mph / 6.84 km/h
Gradeability - 2WD 30 %
Platform Capacity - Restricted 1000 lb / 453.59 kg
Platform Capacity - Unrestricted 500 lb / 226.80 kg
Swing 360 Degrees
Swing Type Continuous
Turning Radius - Outside (4WS) 11 ft 2 in. / 3.4 m
dimensional data
Ground Clearance 1 ft / 0.3 m
Machine Height 8 ft 4 in. / 2.54 m
Machine Length 26 ft 5 in. / 8.05 m
Machine Width 7 ft / 2.13 m
Platform Dimension A 3 ft / 0.91 m
Platform Dimension B 8 ft / 2.44 m
Platform Height 60 ft 5 in. / 18.42 m
Tailswing 5 in. / 0.13 m
Tire Size 14 x 17.5 Air Boss
Reach specifications
Horizontal Jib Rotation 0 Degrees
Horizontal Outreach 39 ft 7 in. / 12.07 m
Platform Height 60 ft 5 in. / 18.42 m
Up and Over Height 26 ft 7 in. / 8.1 m
Vertical Jib Rotation 0 Degrees
 general
Capacity - Hydraulic Reservoir 31 gal. / 115.83 L
Ground Bearing Pressure 94 psi / 6.58 Kg/cm2
Machine Weight 24100 lb / 10931.58 kg

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics