Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Uwchland, Pennsylvania

Just about any construction project, big or small, requires machines in top-notch condition for smooth and timely completion.

Among all contractors, first time entrepreneurs or well established construction companies, a big chink is now opting for construction equipment rentals for maximizing their profit margins. Finding reliable vendors through reputed platforms like ours is easy and hassle free.

Rental services for the provision of heavy construction equipment in Uwchland are hassle free and the best part is that there are no ownership costs involved.

Since our vendors serve all of Uwchland as well as neighboring localities, you can be assured of the fact that there'd always be some convenient locations for you to pick heavy machinery or tools from. Some vendors also provide construction equipment transportation as an add-on.

Dial our toll free number or post the online query (through contact form on the right) to get started today!

Equipment Rental Uwchland, Construction equipment rental Uwchland, Construction Uwchland, Heavy Equipment Rental Uwchland.

Unable to parse entered address. API response code: REQUEST_DENIED

JLG® Telehandler G5-18A

JLG JLG® Telehandler G5-18A
Key Specs

  • Maximum Lift Capacity: 5512 lb / 2500 kg
  • Maximum Lift Height: 18 ft / 5.60 m
  • Maximum Reach: 11 ft / 3.30 m

Key Features

  • Comfortable cab to reduce operator fatigue
  • Tight turning radius to maneuver through crowded jobsites
  • Variety of attachments for versatility in handling jobsite challenges
  • Universal skid steer adapter compatible with existing skid steer attachments
  • Fuel-efficient Tier 4 final Deutz engine
Performance
Breakout Force 8093 lbf / 36 kN
Drawbar Pull 8902 lbf / 39.60 kN
Frame Leveling 0 Degrees
Lift Capacity at Full Height 4409 lb / 2000 kg
Lift Capacity at Max Reach (Stabs Up) 1764 lb / 800 kg
Load Center 1 ft 8 in. / 0.5 m
Maximum Lift Capacity 5512 lb / 2500 kg
Maximum Lift Height 18 ft / 5.60 m
Maximum Reach 11 ft / 3.30 m
Outriggers or Stabilizers No
Outside Turning Radius 10 ft 6 in. / 3.2 m
Speed - Maximum Crowd 3 sec.
Speed - Maximum Dump 2 sec.
Speed - Maximum Lift 7 sec.
Speed - Maximum Lower 5 sec.
Speed - Maximum Telescope In 4 sec.
Speed - Maximum Telescope Out 7 sec.
Speed - Maximum Travel 15 mph / 24 km/h
Towing Capacity 6614 lb / 3000 kg
Dimensional Data
Cab Width 2 ft 10 in. / 0.87 m
Ground Clearance 1 ft / 0.31 m
Machine Height 6 ft 4 in. / 1.92 m
Machine Length 12 ft / 3.66 m
Machine Length (Forks) 12 ft 6 in. / 3.82 m
Machine Width 6 ft / 1.83 m
Tire Size 12 X 16.5 12PR
Track Width 4 ft 11 in. / 1.51 m
Wheelbase 7 ft 6 in. / 2.29 m
Power Source
Capacity - Coolant 3 gal. / 13.20 L
Capacity - Engine Oil 2 gal. / 9.10 L
Capacity - Fuel Tank 24 gal. / 91 L
Engine Horsepower 74 hp / 55.40 kW
Engine Manufacturer Deutz
Engine Model TD 2.9 L4
Maximum Engine RPM 2300 rpm
General
Axle-Front High Bias, Limited Slip
Axle-Rear Oscillating
Capacity - Hydraulic Reservoir 16 gal. / 61 L
Function Pump Type Gear
Hydraulic System Flow 19 gal/min. / 72.30 L/Min
Hydraulic System Pressure 3495 psi / 241 bar
Operating Vehicle Weight 11001 lb / 4990 kg
Service Brake Type Wet Multi-Disc
Transmission Type Hydrostatic

John Deere Tractor Loader 210K

Superior grading tractor and much more.
Introducing the latest versions of the highly popular “210". Widely acclaimed as the best industrial-strength loader you can run - grading contractors, paving crews, and landscapers have had our number. But if you think the new K-Series are just great grading machines, you're only scratching the surface of their potential. At 66 kW (88 hp), the 210K Tractor Loader from John Deere brings plenty of ability to a wide variety of tasks. Equip yours with an optional four-season cab, single-lever loader-control with integrated electrohydraulic control for auxiliary (3rd function) loader hydraulics, multipurpose bucket, 41-kW (55 hp) hydromechanical PTO rated at 540 rpm, dual-tilt cylinders for optimal paving & grading productivity in every direction, and limited-slip mechanical-front-wheel-drive axle, and you'll be ready and able for whatever work comes your way. Delivering more pulling power than the 210LJ it replaces, the 210K may be all the tractor loader you need.

With John Deere WorksightTM, JDLinkTM monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISORTM Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It's the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it's only available from John Deere.

ENGINE
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech E 4045HT073
Net Power, kW (hp) @ Rated rpm 66 (88) @ 2000
Displacement, L (cu in) 4.5 (276)
ELECTRICAL
Volts 12
Alternator amps 120
TRANSMISSION
Type Power Shift
Speed Range - forward 4
Speed Range - reverse 2
Maximum Speed - Forward, kph (mph) 31.2 (19.4)
Maximum Speed - Reverse, kph (mph) 12.9 (8)
BRAKES
Service type Wet Multi Disc
Actuation Hydraulic w/Power Assist
HYDRAULIC SYSTEM
Pump Type Gear
Pump Flow, L/min (gpm) 96 (25.3)
System pressure, kPa (psi) 18961 (2750)
MFWD
Type Power Shift
Axle Oscillation, deg 22
LOADER AND BUCKET
SAE Heaped Capacity, cu m (cu yd) 0.77 (1)
Loader Bucket Width, mm (in) 2184 (86)
Breakout Force, kN (lb) 44.3 (9953)
Lift Capacity to Full Height, kg (lb) 2548 (5612)
Dump Clearance @ 45 deg, mm (ft in) 2670 (8 ft 9 in)
Dump Reach, mm (in) 914 (36)
Bucket Hinge Pin Max Height, mm (ft in) 3340 (11 ft )
Coupler (mechanical, hydraulic) Standard
POWER TAKE OFF,STD/OPT
PTO Optional
Type Mechanical FWD
PTO Rated Speed, rpm 540
DIMENSIONS
Transport Height, mm (ft in) 2540 (8 ft 4 in)
Overall width, mm (ft in) 2130 (7 ft )
Overall Length, mm (ft in) 5230 (17 ft 2 in)
CAPACITIES
Fuel Tank, L (gal) 102.2 (27)
Hydraulic Reservoir, L (gal) 37 (9.8)
WEIGHT
SAE Operating Weight, kg (lb) 4959 (10936)
Metric Ton Weight, kg (lb) 4.959 (10.936)

Engine Powered Scissor Lifts 260MRT

JLG Engine Powered Scissor Lifts 260MRT
Key Specs

  • Machine Width: 5 ft 9 in. / 1.75
  • Platform Capacity: 1250 lb / 566.99 kg
  • Platform Height: 26 ft / 7.92 m

Key Features

  • Narrow 69 in chassis fits into spaces other scissor lifts can't
  • Large work platform and 1,250 lb platform capacity so you can be more productive
  • Standard four wheel drive and 35 percent gradeability keep you going
Power Source
Engine Model Kubota 24.5 hp (Dual Fuel)
Engine Type - Diesel (HRC) Kubota 23.5 hp (Diesel)
Fuel Tank Capacity - Diesel 8 gal. / 28.39 L
General
Brakes Spring Applied, Hydraulically Released
Capacity - Hydraulic Reservoir 15 gal. / 56.78 L
Ground Bearing Pressure 33 psi / 2.31 Kg/cm2
Machine Weight 7360 lb / 3338.44 kg
Performance
Drive Speed - Platform Elevated 0.50 mph / 0.80 km/h
Drive Speed - Platform Lowered 4 mph / 5.63 km/h
Gradeability - 4WD 35 %
Lift Time 27 sec.
Lower Time 21 sec.
Maximum Drive Height 26 ft / 7.92 m
Platform Capacity 1250 lb / 566.99 kg
Platform Capacity - Extension 300 lb / 136.08 kg
Turning Radius - Outside 14 ft 5 in. / 4.39 m
Dimensional Data
Ground Clearance 8 in. / 0.2 m
Machine Height 7 ft 10 in. / 2.37 m
Machine Height - Rails Folded 6 ft 5 in. / 1.96 m
Machine Length 8 ft 3 in. / 2.5 m
Machine Width 5 ft 9 in. / 1.75 m
Platform Dimension A 5 ft 5 in. / 1.65 m
Platform Dimension B 8 ft 6 in. / 2.59 m
Platform Extension Length 4 ft / 1.22 m
Platform Height 26 ft / 7.92 m
Platform Height - Lowered 4 ft 2 in. / 1.26 m
Platform Railing Height 3 ft 8 in. / 1.1 m
Tire Size 26 x 12 Lug Tread
Wheelbase 6 ft 6 in. / 1.98 m
Reach Specifications
Platform Height 26 ft / 7.92 m
Working Height 32 ft / 9.75 m

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics