get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Hartford, West-Virginia

We represent a network of several vendors in the region that provide high-end construction equipment on rent in Hartford. It's one of the largest rental networks in the state and we only take on-board vendors whose fleets have been inspected by our experts.

Diggers & earthmovers, excavators, boom lifts, forklifts or anything else including general construction tools – we have got you covered!

That been said, you may need any of theseheavy machines and equipments for just few hours at the jobsite or you may want to rent them for a long duration of time. There is no restriction on the rental period when you choose construction equipment rentals in Hartford through our network.

You can get more information about the equipment available, rental terms, etc. from our customer support executive. Dial our toll free number or fill out the online contact form (on the right) to get in touch!

Equipment Rental Hartford, Construction equipment rental Hartford, Construction Hartford, Heavy Equipment Rental Hartford.

Unable to parse entered address. API response code: REQUEST_DENIED

New Holland Compact Wheel Loaders W80B TC

Compact Wheel Loaders W80BTC

PRECISE CONTROL AND LOAD PLACEMENT.
New Holland compact wheel loaders provide a combination of increased versatility, increased comfort and control so you get the job done more quickly and efficiently.
SMART precise load control and speed control improves operating efficiency. And these wheel loaders do much more than load. With big engine and hydraulic power and a choice of buckets and attachments, you can scrape, grade, haul and more.

Engine
Model Tier III certified FPT F5C
Horsepower, gross, hp (kW) 82 (61)
Horsepower, net, hp (kW) 77 (57)
Rated rpm 2,500
Torque, net (SAE J1349) 226 lbs-ft @ 1,400 rpm
Displacement, cu in (l) 189 (3.11)
Aspiration Natural
Transmission
1st Gear, mph 3,7
2nd Gear, mph 12,4
High travel speed (HTS) option engaged, mph. 21,7
Hydraulic
Pump capacity, gpm (lpm) 21.1 (80)
System relief pressure, psi 3.916
Performance - bucket with quick coupler
Bucket capacity heaped, cu yd ( m³) 1.31 (1.0)
Bucket capacity struck, yd (m) 1.09 (.83)
Breakout force, lbs (kg) 11,982 (5435)
Static tip load straight, lbs (kg) 9,741 (4418)
Static tip load full turn, lbs (kg) 8,281 (3756)
Operating weight, lbs (kg) 12,676 (5773)
Dump height, ft in (mm) 8’ 11” (2671)
Dump reach, in (mm) 33.6 (852)
Dimensions
Overall length 18′ 6″ (5650 mm)
Wheelbase 92.5″ (2350 mm)
Height to top of ROPS/Cab 9′ 2″ (2790 mm)
Dump reach at full height @ 45° 35″ (890 mm)
Dump reach @ 7’ and 45° dump 4′ 3″ (1300 mm)
Dump clearance at full height @ 45° 8′ 9″ (2671 mm)
Hinge pin height 11′ 4″ (3459 mm)
Dig depth below grade 3.5″ (89 mm)
Ground clearance under axle 13″ (330 mm)
Width over tires 6′ 5″ (1963 mm)
Bucket rollback at carry 52°
Bucket rollback fully raised 54°
Turning radius 13′ 8″ (4154 mm)
Articulation angle 41°

John Deere Wheel Loader 844K-II

Productivity inspired.
Serious productivity demands serious thinking. Many of the numerous advantages of the 844K-II came from the brightest minds in the industry - our Customer Advocate Group. Armed with insights from loader owners and users like you, we equipped these productive material movers with larger, higher-capacity axles with standard axle cooling and filtration for heavy-duty maneuverability in the most demanding terrain. Self-adjusting wet-disc brakes for extended wear life and sure stops. Advanced onboard diagnostics with pushbutton customization of machine operation and response. All to help increase productivity and uptime, while lowering daily operating costs. Owners, operators, and maintenance personnel will benefit from the big ideas found in the John Deere Wheel Loader 844K-II.

ENGINE
Engine Make / Engine Model John Deere / PowerTech PSS 6135
Emission Rating EPA Final Tier 4 / EU Stage IV
Net Power, kW (hp) @ Rated rpm 281 (377) @ 1600
Displacement, L (cu in) 13.5 (824)
Net Peak Torque, N-m (lb-ft) 1804 (1331)
Calculated % Torque Rise 39
ELECTRICAL
Volts 24
Alternator amps 130
TRANSMISSION
Type PowerShift
Max. Travel Speed - fwd, kph (mph) 40 (24.9)
Max. Travel Speed - rev, kph (mph) 30.7 (19.1)
DIFFERENTIAL
Traction Device - Front / Rear F: 100 / R: Open
FINAL DRIVE
Front Axle Type Planetary - Midboard
Rear Axle Type Planetary - Midboard
SERVICE BRAKES
Service Brakes Type Multi Disc
Service brake location Outboard
Service brake actuation ---
HYDRAuLIC SYSTEM
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 594 (157)
System Pressure, kPa (psi) 24132 (3500)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) 5.5 (7.25)
Bucket Capacity Max., cu m (cu yd) 6.2 (8.1)
Breakout Force, Std Bucket, kN (lb) 21674 (47782)
Ride Control Yes
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 5.5 (7.25)
Tire Size Standard 875/65R29
TIPPING LOAD
Straight, kg (lb) 25281 (55725)
Full Turn, kg (lb) 21816 (48096)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 4620 (15 ft. 2 in.)
Dump Clear @ 45 deg, mm (ft in) 3320 (10 ft. 11 in.)
Reach @ 7', mm (ft in) 2280 (7 ft. 6 in.)
Reach @ Full Height, mm (ft in) 1490 (4 ft. 11 in.)
Wheelbase, mm (ft in) 3700 (12 ft. 2 in.)
Clearance Circle, mm (ft in) 1592 (52 ft. 3 in.)
Overall Length, mm (ft in) 9650 (31 ft. 8 in.)
Height to Top of Cab, mm (ft in) 3760 (12 ft. 4 in.)
Ground Clearance, mm (in) 463 (18.2 in.)
CAPACITIES
Fuel Tank, L (gal) 534 (141)
Hydraulic Reservoir, L (gal) 236 (62.3)
WEIGHT
SAE Operating Weight, kg (lb) 34207 (75413)
Metric Ton Weight, kg (lb) 34.207 (75.413)

Komatsu Wheel Loaders WA1200-6
WA1200-6 Wheel Loader

26.2 yd³. 1765 hp. Incredible numbers for Komatsu's largest, most productive wheel loader, the WA1200-6. From the low vibration cab the operator uses his advanced joystick control and modulated clutch drive system to maneuver in tight areas to load trucks up to 320 ton capacity. High stability and breakout force give the operator the confidence he needs to keep up with the production demands of today's mines.

Engine
Model Komatsu SDA16V160E-2
Type Water-cooled, 4-cycle
Aspiration Turbocharged and aftercooled
Number of cylinders 16
Bore x stroke 6.26'' x 7.48'' 159 mm x 190 mm
Piston displacement 3,661 in³ 60 ltr
Governor Electronic fuel control
Flywheel horsepower
SAE J1995 - Gross 1892 HP 1411 kW
ISO 9249/SAE J1349 - Net 1765 HP 1316 kW 1765 hP
Rated rpm 1800 rpm
Fan drive method for radiator cooling Mechanical
Fuel system Modular common rail system direct injection
Lubrication system
Method Screw pump, forced lubrication
Filter Full-flow
Air cleaner Dry-type with double elements and automatic dust evacuation with dust indicator on monitor
Transmission
Torque converter - Type 3-element, single-stage, single-phase
Transmission - Type Full power shift, planetary gear with modulated clutch
Travel Speed (Measured with 60/80 R57 tires):
1st Forward 3.8 mph 6.1 km/h
1st Reverse 3.9 mph 6.3 km/h
2nd Forward 6.9 mph 11.1 km/h
2nd Reverse 7.1 mph 11.4 km/h
3rd Forward 11.6 mph 18.7 km/h
3rd Reverse 12.0 mph 19.3 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, full-floating
Rear Center-pin support, full-floating, 16˚ total oscillation
Reduction gear Spiral bevel gear
Differential gear Straight bevel gear
Final reduction gear Planetary gear, double reduction, oil bath
Brakes
Service brakes Hydraulically actuated, wet, multi-disc brakes actuated on four wheels.
Parking brake Wet, multi-disc, hydraulically-released, spring applied in the transmission.
Secondary brake Parking brake is commonly used
Steering System
Type Articulated, fully-hydraulic power steering
Steering angle 40° each direction
Turning radius outside corner of bucket and teeth 47'0" 14330 mm
Hydraulic System
14330 mm Rated capacity (discharge flow) @1800 engine rpm
Loader pump 269 gal/min 1018 ltr/min
Steering pump 167 gal/min 633 ltr/min
Switch pump 167 gal/min 633 ltr/min
Relief valve setting 4,550 psi 31.4 MPa 320 kg/cm²
Control valves A double spool closed-center hydraulic valve and a steering valve combined with a demand valve to provide optimum flow.
Hydraulic cylinders/Number of cylinders Bore x stroke: Bore x stroke:
Boom/2 14.2''x 72.2'' 360 mm x 1835 mm
Bucket/2 11.8''x 38.8" 300 mm x 985 mm
Steering/2 8.9''x 26.0'' 225 mm x 660 mm
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 14.8 sec
Dump 3.2 sec
Lower (empty) 5.3 sec
OPS FOPS Level 2 Cab
The cab is mounted on viscous damping mounts and is well insulated.
Service Refill Capacities
Cooling system 132 U.S. gal 500 ltr
Fuel tank 1,347 U.S. gal 5100 ltr
Engine 74 U.S. gal 280 ltr
Hydraulic system 343 U.S. gal 1300 ltr
Differential, final drive (each axle) 177 U.S. gal 670 ltr
Torque converter and transmission 92 U.S. gal 350 ltr
Brake oil 20 U.S. gal 75 ltr
Brake cooling 77 U.S. gal 290 ltr
Tires
Select proper tires based on job requirements. 500 ltr
Standard rim size 47.00-57/5.0
Standard tire size 60/80 R57

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics