get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Skelton, West-Virginia

We represent a network of several vendors in the region that provide high-end construction equipment on rent in Skelton. It's one of the largest rental networks in the state and we only take on-board vendors whose fleets have been inspected by our experts.

Diggers & earthmovers, excavators, boom lifts, forklifts or anything else including general construction tools – we have got you covered!

That been said, you may need any of theseheavy machines and equipments for just few hours at the jobsite or you may want to rent them for a long duration of time. There is no restriction on the rental period when you choose construction equipment rentals in Skelton through our network.

You can get more information about the equipment available, rental terms, etc. from our customer support executive. Dial our toll free number or fill out the online contact form (on the right) to get in touch!

Equipment Rental Skelton, Construction equipment rental Skelton, Construction Skelton, Heavy Equipment Rental Skelton.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Excavators PC800LC-8 MH
PC800LC-8 MH Material Handler (55'-68' Reach)

If your job calls for a grapple, clam or magnet with a long reach, the PC800LC-8 material handler can provide the right arm and boom combinations you'll need.

Engine
EPA Tier 3 and EU stage 3A emission certified.
Model Komatsu SAA6D140E-5
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed control, electronic
Horsepower:
SAE J1995 (Gross) 496 HP 370 kW
ISO9249 / SAE J1349 (Net) 487 HP 363 kW
Hydraulic fan at maximum speed (Net) 454 HP 338 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
Hydraulics System
Type EOLSS (Electronic Open-center Load Sensing System)
Number of selectable working modes 3
Main pump:
Type Two (2) variable capacity piston pumps
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 2 x 130.5 U.S. gal/min 2 x 494 ltr/min
Fan drive pump Variable capacity piston type
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Relief valve setting:
Implement circuits 4,550 psi 31.4 MPa 320 kg/cm²
Travel circuit 4,980 psi 34.3 MPa 350 kg/cm²
Swing circuit 4,120 psi 28.4 MPa 290 kg/cm²
Heavy lift circuit 4,980 psi 34.3 MPa 350 kg/cm²
Pilot circuit 430 psi 2.9 MPa 30 kg/cm²
Hydraulic cylinders / Number of cylinders: bore x stroke x rod diameter bore x stroke x rod diameter
Boom / 2 8" x 68" x 5" 202 mm x 1727 mm x 127 mm
Arm / 1 (55' front) 9" x 72" x 6" 229 mm x 1829 mm x 152 mm
Arm / 1 (68' front) 8.5" x 72" x 6" 216 mm x 1829 mm x 152 mm
Drives & Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Travel motor Axial piston motor, in-shoe design
Reduction system Planetary double reduction
Maximum drawbar pull 125,660 lb 559 kN 57000 kg
Gradeability 70%
Maximum travel speed:
High 2.6 mph 4.2 km/h
Low 1.7 mph 2.8 km/h
Service brake Hydraulic lock
Parking brake Oil disc brake
Swing System
Driven method Hydraulic motors (2)
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Oil disc brake
Swing speed 6.8 rpm
Swing torque 209,461 ft. lbs. 28968 kg•m
Undercarriage
Center frame H-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
No. of shoes 51 each side
No. of carrier rollers 3 each side
No. of track rollers 9 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 258.9 U.S. gal 980 ltr
Radiator 26.4 U.S. gal 100 ltr
Engine 15.3 U.S. gal 58 ltr
Final drive, each side 5.3 U.S. gal 20 ltr
Swing drive 2 x 6.5 U.S. gal 2 x 24.5 ltr
Hydraulic tank 116.2 U.S. gal 440 ltr
Operating Weight (approximate)
Operating weight w/o Grapple: 16.8 m / 87796 kg 55' / 193,555 lb
Operating weight w/o Grapple: 20.7 m / 89339 kg 68' / 196,955 lb

New Holland Compact Track Loaders C238

Compact Track Loaders C238

THE SUPER BOOM® ADVANTAGE
New Holland Compact Track Loader's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model FPT / F5H FL413CL
Bore/stroke, in (mm) 3.9 x 4.3 (99 x 109)
Displacement, in3 (L) 207 (3.4)
Fuel injection HPCR Direct
Air intake Turbocharged Aftercooled with external EGR
Horsepower per SAE J1349 Gross hp
(kW)		 90 (67) @ 2500 rpm
Horsepower per SAE J1349 Net hp
(kW)		 84 (63) @ 2500 rpm
Peak torque, lb-ft (Nm) 282 (383) @ 1400 rpm
PowerTrain
Travel speed, low range, mph
(km/h)		 5.1 (8.2)
Travel speed, high range
(optional), mph (km/h)		 7.6 (12.2)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 131.1 (3330)
Top of ROPS, in (mm) 80.4 (2043)
Bottom of level bucket, fully
raised, in (mm)		 124.2 (3155)
Overall length without attachment
with coupler, in (mm)		 117.6 (2986)
Dump angle, degrees 55
Dump reach (max height), in (mm) 34.4 (875)
Rollback, bucket on ground,
degrees		 33
Rollback, bucket at full height,
degrees		 85
Track on ground, in (mm) 63.1 (1602)
Ground clearance (bottom of belly
pan), in (mm)		 9.5 (243)
Angle of departure, degrees 32
Clearance circle without bucket,
in (mm)		 56.2 (1428)
Clearance circle rear, in (mm) 70.4 (1789)
Overall width, in (mm) 76 (1930)
Ground pressure, PSI (with spec belt) 4,4
Hydraulic System
Pump flow, gpm (Lpm) 24.2 (91.5)
Optional high flow, gpm (Lpm) 37.6 (142.5)
Relief pressure, psi (bar) 3046 (210)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 13800 (1723)
Rated operating load, 35% tip, lbs (kg) 2660 (1209)
Tipping load, lbs (kg) 7600 (3447)
Breakout force, lift cylinder, lbs (kN) 6110 (27.2)
Breakout force, bucket cylinder, lbs (kN) 7360 (32.7)
Operating weight, lbs (kg) 10,100 (4581)

JCB Compact Track Loaders 150T

150T

The small platform 1500lb (681kg) rated operating capacity JCB 150T radial lift compact track loader is the lightest track model in our revolutionary range. Our unique single boom and side entry design makes this tracked skid steer comfortable, safe, economical, productive and tough. Designed and built in the USA (home of tracked loaders), the 150T's 56hp (42kW) turbo charged Kohler engine delivers impressive performance and low operating costs.

The 150T has on average 60% better visibility and a 46% larger cab than rival manufacturers- tracked skid steer designs, and there are a whole host of other benefits as well. Like ergonomic controls, an extremely tough powerful boom and a low cost of ownership.

Loader Performance
Operating Capacity 1500lb (681kg)
Operating Weight 8137lb (3691kg)
Engine
Net Engine Power 56hp (42kW)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics