New Holland Skid Steer Loader L216

MORE DIGGING AND PUSHING POWER BY DESIGN
This model features radial-lift boom geometry, with the boom connected directly to the frame for outstanding pushing and excavating power. Maximum reach is achieved at roughly eye level during operation, making it ideal for loading and unloading flatbed trucks and trailers.

Engine
Manufacturer/model	ISM / N844LT
Bore/stroke, in (mm)	3.31 x 3.94 (84 x 100)
Displacement, in3 (L)	135.2 (2.216)
Fuel injection	Indirect
Air intake	Turbocharged with external EGR
Horsepower per SAE J1349 Gross hp (kW)	60 (45) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW)	57 (42) @ 2800 rpm
Peak torque, lb-ft (Nm)	139 (188) @ 1800 rpm

Power Train
Travel speed, low range, mph (km/h)	7.4 (11.9)
Travel speed, high range (optional),mph (km/h)	NA

Dimensions
HEIGHT TO
Bucket hinge pin, in (mm)	112 (2845)
Top of ROPS, in (mm)	75.5 (1919)
Bottom of level bucket, fully raised,in (mm)	105.6 (2682)
Overall length without attachment with coupler, in (mm)	95.9 (2435)
Dump angle, degrees	40°
Dump reach (max height), in (mm)	18.5 (469)
Rollback, bucket on ground, degrees	26°
Rollback, bucket at full height, degrees	95°
Wheelbase, in (mm)	37 (941)
Ground clearance (bottom of belly pan),in (mm)	7 (178)
Angle of departure, degrees	22°
Clearance circle without bucket, in(mm)	48.7 (1237)
Clearance circle rear, in (mm)	56.4 (1433)
Rear axle to bumper, in (mm)	33.8 (858)
Overall width, in (mm)	59.8 (1518)

Hydraulic System
Pump flow, Standard Flow, gpm (Lpm)	18.4 (69.7)
Relief pressure, psi (bar)	3046 (210)
Optional high flow, gpm (Lpm)	-

Performance Specs
Rated operating load, 50% tip, lbs (kg)	1600 (725)
Tipping load, lbs (kg)	3200 (1455)
Breakout force, lift cylinder, lbs (kN)	3310 (14.7)
Breakout force, bucket cylinder, lbs (kN)	5270 (23.4)
Operating weight, lbs (kg)	5510 (2505)