Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Williamsport, Ohio

Do you need the latest, clean and well-maintained heavy construction equipment delivered to the jobsite in Williamsport?

With us, you can gain instant access to a wide selection of construction tools and machineries. Yes, since we have onboard a network of reliable vendors having a large ready-to-rent inventory of equipment, you will never to look anywhere else for heavy construction equipment rentals in Williamsport.

Each time you need some extra machinery, accessories or tools, our vendors will have them delivered right to your jobsite, and on time. You may be in need of such machines and tools for just one day, a week or any length of time. Our vendors do not impose unrealistic or inflexible rental agreements on you.

Dial our toll free number today or submit the short contact form on the right to get started. Our vendors will start contacting you to learn about your exact requirements in no time.

Equipment Rental Williamsport, Construction equipment rental Williamsport, Construction Williamsport, Heavy Equipment Rental Williamsport .

Unable to parse entered address. API response code: REQUEST_DENIED

If you own a construction company, run a warehouse or have a goods transport business in Ohio, chances are that you'd need a Excavator that you can deploy for indoor or outdoor operations.

But, not every business has the capital to invest in brand new Excavators. Even if the business is flourishing and you have all the funds needed to purchase new equipment, you may still want to go for Excavator rentals instead of betting a huge sum of money on purchasing such equipment.

But, finding reliable Excavator rentals in Ohio isn't exactly straightforward. From fee comparison to dependability on a vendor to availability of different makes and models of Excavators, there are numerous factors that one needs to consider when hiring a Excavator in Ohio.

This is where HeavyRentals.Equipment can help.

Our nationwide network of Excavator rental companies, spanning across 5,000+ locations covers Ohio as well. So, the next time you need a Excavator, whether for few hours, days, weeks or months at a stretch, you can just request a free Excavator rental estimate at HeavyRentals.Equipment. Within minutes, we will match your Excavator requirements in Ohio against vendors in your area; you will be talking to some of the most reliable vendors with well maintained fleet of Excavators on the same day. After all, we add a rental company or vendor to our list only after carrying out necessary background checks.

As far as important parameters such as Excavator weight capacity, adjustable width, power sources, ease-of-use and power steering are concerned - be assured that you will have no dearth of options to choose from. While you request a free estimate at HeavyRentals.Equipment or narrate your requirements to our support staff by dialing our helpline number, you remain in total control of which Excavator rental company in Ohio you wish to choose.

Komatsu Trucks 960E-2K

960E-2K Electric Drive Truck

The 960E-2K provides the same features as the 960E-2 electric drive truck, but uses Komatsu Drive with Siemens liquid cooled insulated Gate Bipolar Transistor (IGBT). In addition, Komatsu Drive provides improve torque capacity, a top speed of 40 mph and Hill Start logic which helps reduce rollback in case the truck has to stop while travelling uphill.

Engine
Make and model* Komatsu SSDA18V170
Fuel Diesel
Number of cylinders 18
Operating cycle 4 cycle
Gross horsepower** @ 1900 rpm 3,500 HP 2610 kW
Net flywheel power*** @ 1900 rpm 3,346 HP 2495 kW
Weight (wet) 25,897 lb 11750 kg
Weight (dry) 24,795 lb 11250 kg
* Optional Tier 4 emission compliant engine for North American market. Non-emissionized engine for markets outside of North America.
** Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
***Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC CURRENT
Drive System*. Komatsu AC Drive
Alternator Siemens
Dual Fan Main Blower:
Alternator Flow 9,380 cfm 266 m3/min
Wheel Motor Flow 14,800 cfm 419 m3/min
Control IGBT AC Torque Control System
Ratio 38.12
Speed (maximum) 40 mph 64.5 km/h
* Drive system performance depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu must analyze each job condition to assure acceptable application.
Tires and Rims
Rock service, tubeless, radial tires
Standard tire* 56/80 R63
Flange mount rim:
Rim assembly 41'' x 63'' x 5.5'' 1041 mm x 1600 mm x 140 mm
Rims rated at 758 kPa / 110 psi cold inflation pressure.
Typical tire weight 65,154 lb 29553 kg
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Rubber mounts on frame are standard. Eyebrow, body up sling, extended canopy and pivot exhaust heating are optional.
Floor sheet
200,000 psi / 1379 mPa tensile strength steel / Outer
0.63'' 16 mm
Floor sheet
200,000 psi / 1379 mPa tensile strength steel / Center
0.75'' 19 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel / Outer
0.39' 10 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel / Center
0.47'' 12 mm
Side sheet
200,000 psi / 1379 mPa tensile strength steel
0.39' 10 mm
Canopy sheet
100,000 psi / 690 mPa tensile strength steel
0.24'' 6 mm
Capacity struck 195 yd3 149 m3
SAE heaped 2:1 280 yd3 214 m3
Standard Komatsu body weight 90,000 lb 40823 kg
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS Level 2 cab (ISO 3449), adjustable air suspension seat w/lumbar support and arm rests, full-size passenger seat, maximum R-value insulation, tilt and telescoping steering column, electric windshield wipers w/washer, tinted glass, power windows, Payload Meter III, 61,000 Btu/hr heater and defroster, 19,900 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material
tensile strength steel
70,000 psi 482.6 mPa
Casting material
tensile strength steel
90,000 psi 620.5 mPa
Rail width 12'' 305 mm
Rail depth (minimum) 34'' 864 mm
Top and bottom plate thickness 1.77'' 45 mm
Side plate thickness / Rear 0.98'' 25 mm
Side plate thickness / Front 1.26'' 32 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
Service brakes: Oil-cooled, hydraulic actuated, multiple disc brakes at each wheel
Traction system Wheel Spin-Slide Control
Max. service apply pressure 2750 psi 18960 kPa
Total friction area per brake 16,078 in2 103729 cm2
Secondary brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch activated
Parking brakes Multiple disc, spring-applied, hydraulically-released, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on +-15% grade at maximum gross vehicle weight
Electric dynamic retarder 6,196 HP 4620 kW
Continuously rated high-density blown grids w/retard capacity at low speeds and retard in reverse.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.92'' 328 mm
Max. rear stroke 9.40'' 239 mm
Max. rear axle oscillation 6.5°
Cooling System
L&M radiator assembly, split-flow, with deaerator-type top tank.
Radiator frontal area 75.5 ft2 7.02 m2
Service Capacities
Cooling System 190 U.S. gal 719 L
Crankcase 90 U.S. gal 341 L
Hydraulic system 350 U.S. gal 1325 L
Motor gear box (each) 37 U.S. gal 140 L
Fuel tank 1400 U.S. gal 5300 L
Hydraulic System
Steering Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
Turning circle diameter (SAE) 105' 32 m
Reservoir 250 U.S. gal 947 L
Filtration In-line replaceable elements
Suction Single, full flow, 100 mesh
Hoist and steering Dual, in-line, high pressure
Brake component cabinet Above deck, easily accessible with diagnostic test connections
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening
Hoist times:
Power-up loaded 24 sec
Power-down 14 sec
Float-down empty 24 sec
Pumps Two pumps, single package, in-line
Hoist and brake cooling Tandem gear pump with output of 931 lpm / 246 gpm at 1900 rpm and 18960 kPa / 2750 psi
Steering and brake Pressure-compensating piston pump with output of 246 lpm / 65 gpm at 1900 rpm and 20685 kPa / 3,000 psi
System relief pressures:
Hoist and brake cooling 2,500 psi 17237 kPa
Steering and brake 3,000 psi 20685 kPa
Ports available for powering disabled truck and for system diagnostics.
Electrical System
4 x 8D 1450 CCA, 12 volt, in series/parallel, bumper-mounted with disconnect switch.
Alternator 24 volt, 250 amp
Lighting 24 volt
Cranking motors Two/24 volt
Weight Distribution
Empty vehicle weight:
Front Axle Distribution / 49.5% 272,250 lbs 123490 kg
Rear Axle Distribution / 50.5% 277,750 lbs 125985 kg
Total EVW 550,000 lbs 249475 kg
Gross vehicle weight:
Front Axle Distribution / 33% 419,100 lbs 190104 kg
Rear Axle Distribution / 67% 850,900 lbs 385968 kg
Nominal GVW 1,270,000 lbs 576072 kg
Nominal Payload 720,000 lbs (360 short tons) 326585 kg (327 metric tons )
Nominal payload is defined by Komatsu America Corp's payload policy documentation. In general, the nominal payload must be adjusted for the specific vehicle configuration and site application.
The figures above are provided for basic product description purposes.
Please contact your Komatsu distributor for specific application requirements.

If you own a construction company, run a warehouse or have a goods transport business in Lake Forest, chances are that you'd need a Excavator that you can deploy for indoor or outdoor operations.

But, not every business has the capital to invest in brand new Excavators. Even if the business is flourishing and you have all the funds needed to purchase new equipment, you may still want to go for Excavator rentals instead of betting a huge sum of money on purchasing such equipment.

But, finding reliable Excavator rentals in Lake Forest isn't exactly straightforward. From fee comparison to dependability on a vendor to availability of different makes and models of Excavators, there are numerous factors that one needs to consider when hiring a Excavator in Lake Forest.

This is where HeavyRentals.Equipment can help.

Our nationwide network of Excavator rental companies, spanning across 5,000+ locations covers Lake Forest as well. So, the next time you need a Excavator, whether for few hours, days, weeks or months at a stretch, you can just request a free Excavator rental estimate at HeavyRentals.Equipment. Within minutes, we will match your Excavator requirements in Lake Forest against vendors in your area; you will be talking to some of the most reliable vendors with well maintained fleet of Excavators on the same day. After all, we add a rental company or vendor to our list only after carrying out necessary background checks.

As far as important parameters such as Excavator weight capacity, adjustable width, power sources, ease-of-use and power steering are concerned - be assured that you will have no dearth of options to choose from. While you request a free estimate at HeavyRentals.Equipment or narrate your requirements to our support staff by dialing our helpline number, you remain in total control of which Excavator rental company in Lake Forest you wish to choose.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics